Search results
Results from the WOW.Com Content Network
A second display or second displays is a common term describing the multi-monitor setup with just one additional monitor attached. Today it is particularly common to have one workstation with two monitors connected where the second monitor is referred to as the second display. Many tablets will serve as a second display connected to a laptop. [22]
Computer and handheld screens Designation Usage W (px) H Aspect ratio Total pixels Storage Display Pixel 0.26K1 Microvision: 16: ×: 16 1∶1: 1∶1: 1∶1: 256
64:35, 16:5 and 16:10/8:5 (all effectively 4:3) 4 bpp MDA: Monochrome Display Adapter The original standard on IBM PCs and IBM PC XTs with 4 kB video RAM. Introduced in 1981 by IBM. Supports text mode only. [1] 720×350 (252k) 720 350 252,000 72:35 (effectively 4:3 (non-square pixels) on CRTs but could be a variety of aspects on LCDs) 1 bpp
The Super VGA standardized the following resolutions: [4] 640 × 400 or 640 × 480 with 256 colors; 800 × 600 with 24-bit color depth; 1024 × 768 with 24-bit color depth; 1280 × 1024 with 24-bit color depth; SVGA uses the same DE-15 VGA connector as the original standard, and otherwise operates over the same cabling and interfaces as VGA.
IBM MDA, CGA and EGA monitors, all supported by the EGA card. The original IBM EGA was an 8-bit PC ISA card with 64 KB of onboard RAM. An optional daughter-board (the Graphics Memory Expansion Card) provided a minimum of 64 KB additional RAM, and up to 192 KB if fully populated with the Graphics Memory Module Kit. [22]
The highest display resolution of any mode was 640 × 200, and the highest color depth supported was 4-bit (16 colors). The CGA card could be connected either to a direct-drive CRT monitor using a 4-bit digital RGBI interface, such as the IBM 5153 color display, or to an NTSC-compatible television or composite video monitor via an RCA connector ...
VGA section on the motherboard in IBM PS/55. The color palette random access memory (RAM) and its corresponding digital-to-analog converter (DAC) were integrated into one chip (the RAMDAC) and the cathode-ray tube controller was integrated into a main VGA chip, which eliminated several other chips in previous graphics adapters, so VGA only additionally required external video RAM and timing ...
Monitors usually have the aspect ratio 4:3, 5:4, 16:10 or 16:9. Radius of curvature (for curved monitors ) – is the radius that a circle would have if it had the same curvature as the display. This value is typically given in millimeters, but expressed with the letter "R" instead of a unit (for example, a display with "3800R curvature" has a ...