Search results
Results from the WOW.Com Content Network
For gas appliances, a flame supervision device (FSD) – alternative name: flame failure device (FFD) – is a general term for any device designed to stop flammable gas going to the burner of a gas appliance if the flame is extinguished. This is to prevent a dangerous buildup of gas within the appliance, its chimney or the room. [1]
In natural gas furnaces, water heaters, and room heating systems, a safety cut-off switch is normally included so that the gas supply to the pilot and heating system is shut off by an electrically operated valve if the pilot light goes out. This cut-off switch usually detects the pilot light in one of several ways:
A small leak of combustion gases into the heated air can be dangerous to the occupants of the heated space, because of possible carbon monoxide build up. [2] A condensing forced-air furnace; flue pipes are plastic, not metal, because of the low waste-gas temperature. Plastic outlet for a condensing natural gas hot air furnace.
A furnace can be lit by a small pilot flame or in some older models, by hand. Most pilot flames nowadays are lit by an ignition transformer (much like a car's spark plugs). The pilot flame in turn lights up the main flame. The pilot flame uses natural gas while the main flame can use both diesel and natural gas. When using liquid fuels, an ...
High efficiency condensing gas furnaces typically achieve between 90% and 98% AFUE. [3] A condensing gas furnace includes a sealed combustion area, combustion draft inducer and a secondary heat exchanger. The primary gain in efficiency for a condensing gas furnace, as compared to a mid-efficiency forced-air or forced-draft furnace, is the ...
Requires less energy than electric resistance heating and possibly more efficient than fossil fuel fired furnaces (gas/oil/coal). Air source types may not be suitable for cold climates unless used with backup (secondary) source of heat. Newer models may still provide heat when coping with temperatures below 0 °C (32 °F).
A carbide lamp or acetylene gas lamp is a simple lamp that produces and burns acetylene (C 2 H 2), which is created by the reaction of calcium carbide (CaC 2) with water (H 2 O). [ 1 ] Acetylene gas lamps were used to illuminate buildings, as lighthouse beacons, and as headlights on motor-cars and bicycles.
Ignitor was designed to produce approximately 100 MW of fusion power despite its relatively small size. For comparison, the intended weight was 500 metric tons, while the ITER international reactor, expected to be the first tokamak to reach scientific breakeven, is some 19,000 tons.