enow.com Web Search

  1. Ads

    related to: 3 4 plywood load rating

Search results

  1. Results from the WOW.Com Content Network
  2. EUR-pallet - Wikipedia

    en.wikipedia.org/wiki/EUR-pallet

    The safe working load of a EUR/EPAL-pallet is 1,500 kg. The maximum additional load can be up to 4,000 kg when stacking. [2] The EUR/EPAL-pallet may weigh up to 1,500 kg (3,300 lb) when equally loaded, otherwise, the limit is 1,000 kg (2,200 lb).

  3. BS 1088 - Wikipedia

    en.wikipedia.org/wiki/BS_1088

    Moisture Content-- BS 1088 plywood must have a moisture content between 6% and 14% when it leaves the factory. Finishing-- Boards will be sanded on both sides equally. Length & Width-- The length or width of a board produced as a standard size shall not be less than the specified size nor more than 6.3 mm (0.25") greater than the specified size.

  4. Laminated veneer lumber - Wikipedia

    en.wikipedia.org/wiki/Laminated_veneer_lumber

    In 1971 "Micro=Lam LVL" was introduced. "Micro=Lam LVL" consisted of laminated veneer lumber billets 4 feet (1.2 m) wide, 3 + 1 ⁄ 2 inches (89 mm) thick, and 80 feet (24 m) long. Troutner proved the structural capabilities of his Micro=Lam product by building a house in Hagerman, Idaho, using beams made of Micro=Lam.

  5. Lumber - Wikipedia

    en.wikipedia.org/wiki/Lumber

    For example, splitting a 10-foot-long (3.0 m) 2×4 (1 + 1 ⁄ 2 by 3 + 1 ⁄ 2 in or 38 by 89 mm) into two 1×4s (34 by 3 + 1 ⁄ 2 in or 19 by 89 mm) of the same length is considered re-sawing. Plastic lumber

  6. Cross-laminated timber - Wikipedia

    en.wikipedia.org/wiki/Cross-laminated_timber

    By gluing layers of wood at right angles, the panel is able to achieve better structural rigidity in both directions. It is similar to plywood but with distinctively thicker laminations (or lamellae). CLT is distinct from glued laminated timber (known as glulam), which is a product with all laminations orientated in the same way. [4]

  7. Plywood - Wikipedia

    en.wikipedia.org/wiki/Plywood

    The most common dimension is 1.2 by 2.4 metres (3 ft 11 in × 7 ft 10 in) or the slightly larger imperial dimension of 4 feet × 8 feet. Plies vary in thickness from 1.4 mm to 4.3 mm. The number of plies—which is always odd—depends on the thickness and grade of the sheet. Roofing can use the thinner 16-millimetre (5 ⁄ 8 in) plywood.

  1. Ads

    related to: 3 4 plywood load rating