Search results
Results from the WOW.Com Content Network
The sizes of the most commonly used plywood sheets are 4 by 8 feet (1,220 mm × 2,440 mm) [20] which was first used by the Portland Manufacturing Company, who developed modern veneer core plywood for the 1905 Portland World Fair. A common metric size for a sheet of plywood is 1200 × 2400 mm. 5 × 5 feet (1,500 × 1,500 mm) is also a common ...
In the United States, SIPs tend to come in sizes from 4 to 24 feet (1.2–7.3 m) in width. Elsewhere, typical product dimensions are 300, 600, or 1,200 mm wide and 2.4, 2.7, and 3 m long, with roof SIPs up to 6 m long.
Moisture Content-- BS 1088 plywood must have a moisture content between 6% and 14% when it leaves the factory. Finishing -- Boards will be sanded on both sides equally. Length & Width -- The length or width of a board produced as a standard size shall not be less than the specified size nor more than 6.3 mm (0.25") greater than the specified size.
The Construction Specifications Institute maintains the following industry standards: MasterFormat – 50 standard divisions of building materials - 2004 edition (current in 2009) 16 Divisions – Original 16 divisions of building materials
Plywood and OSB typically have a density of 560–640 kg/m 3 (35–40 lb/cu ft). For example, 9.5 mm (3 ⁄ 8 in) plywood sheathing or OSB sheathing typically has a surface density of 4.9–5.9 kg/m 2 (1–1.2 lb/sq ft). [51] Many other engineered woods have densities much higher than OSB.
It is now more popular than plywood, commanding 66% of the North American structural panel market. [3] The most common uses are as sheathing in walls, flooring, and roof decking. For exterior wall applications, panels are available with a radiant-barrier layer laminated to one side; this eases installation and increases energy performance of ...
Exterior wall studs are the vertical members to which the wall sheathing and cladding are attached. [14] They are supported on a bottom plate or foundation sill and in turn support the top plate. Studs usually consist of 1 + 1 ⁄ 2 -by- 3 + 1 ⁄ 2 -inch (38 mm × 89 mm) or 1 + 1 ⁄ 2 -by- 5 + 1 ⁄ 2 -inch (38 mm × 140 mm) lumber and are ...
Louisiana-Pacific begins marketing its Oriented Strand Board (OSB) as an exterior siding. 1990: Lawsuits relating to defective OSB exterior siding begin. 1996: Mark Suwyn replaces Merlo as chairman and CEO. 1998: Louisiana-Pacific acquires ABT Building Products as part of its effort to focus on the building products market. 2002