enow.com Web Search

Search results

1. Results from the WOW.Com Content Network

2. Drill bit - Wikipedia

   en.wikipedia.org/wiki/Drill_bit

   In wood, the brad point drill bit is another solution: the center of the drill bit is given not the straight chisel of the twist drill bit, but a spur with a sharp point, and four sharp corners to cut the wood. While drilling, the sharp point of the spur pushes into the soft wood to keep the drill bit in line.

3. List of drill and tap sizes - Wikipedia

   en.wikipedia.org/wiki/List_of_drill_and_tap_sizes

   Example (inch, fine): For 7 ⁄ 16-20 (same diameter as the previous example, but this time with 20 threads per inch, which is considered fine), 0.437 in × 0.90 = 0.393 in (i.e., if the threads are to be fine, then a slightly larger diameter drill bit should be used before tapping the hole for the screw).

4. Drill - Wikipedia

   en.wikipedia.org/wiki/Drill

   High-Speed Drill Bits – these are drill bits made to be very strong and therefore are often used to cut metals; Spade drill Bits – spade-shaped drill bits used primarily to bore holes in softwoods; Hole Saw – a large drill bit with a jagged edge, ideal for cutting larger holes (mostly in wood).

5. Annular cutter - Wikipedia

   en.wikipedia.org/wiki/Annular_cutter

   An annular cutter (also called a core drill, core cutter, broach cutter, trepanning drill, hole saw, or cup-type cutter) is a form of core drill used to create holes in metal. An annular cutter, named after the annulus shape , cuts only a groove at the periphery of the hole and leaves a solid core or slug at the center.

6. Tipped tool - Wikipedia

   en.wikipedia.org/wiki/Tipped_tool

   Tipped tools allow each part of the tool, the shank and the cutter(s), to be made of the material with the best properties for its job. Common materials for the cutters (brazed tips or clamped inserts) include cemented carbide , polycrystalline diamond , and cubic boron nitride . [ 1 ]

7. Brace (tool) - Wikipedia

   en.wikipedia.org/wiki/Brace_(tool)

   Turning the spindle of the chuck in a clockwise direction tightens the drill bit in the chuck; turning counterclockwise loosens the bit for removal. A carpenter using a brace. In most modern braces, immediately behind the chuck is a three position gear release that allows ratcheting of the handle when in tight spots. Turning the gear release ...