Search results
Results from the WOW.Com Content Network
Rigid IBC totes feature integrated pallet bases with dimensions that are generally near the common pallet standard dimension of 1,200 mm × 1,000 mm or 48 in × 42 in (1,219 mm × 1,067 mm). IBC container’s pallet base is designed for universal maneuverability via forklift / pallet jack channels.
The exact capacity varies by manufacturer, purpose, or other factors. Standard drums have inside dimensions of 572 millimetres (22.5 in) diameter and 851 millimetres (33.5 in) height. These dimensions yield a volume of about 218.7 litres (57.8 US gal; 48.1 imp gal), but they are commonly filled to about 200 litres.
An intermediate bulk container (IBC, IBC Tote, IBC Tank) is a multi-use container employed for the general transport, storage, and handling of bulk fluids and materials. IBC tanks are compatible with, and resistant to, an extensive list of chemicals, acids, caustics, as well as inert materials and food grade consumables.
Based on the Transporter, the size and capacity of the Conex were about the same, [nb 2] but the system was made modular, by the addition of a smaller, half-size unit of 6 ft 3 in (1.91 m) long, 4 ft 3 in (1.30 m) wide and 6 ft 10 + 1 ⁄ 2 in (2.10 m) high.
In the United States, cook books sometimes reference cans by size. The Can Manufacturers Institute defines these sizes, expressing them in three-digit numbers, as measured in whole and sixteenths of an inch for the container's nominal outside dimensions: a 307 × 512 would thus measure 3 and 7/16" in diameter by 5 and 3/4" (12/16") in height ...
Sizing or size is a substance that is applied to, or incorporated into, other materials—especially papers and textiles—to act as a protective filler or glaze.Sizing is used in papermaking and textile manufacturing to change the absorption and wear characteristics of those materials.
Mixing of liquids occurs frequently in process engineering. The nature of liquids to blend determines the equipment used. Single-phase blending tends to involve low-shear, high-flow mixers to cause liquid engulfment, while multi-phase mixing generally requires the use of high-shear, low-flow mixers to create droplets of one liquid in laminar, turbulent or transitional flow regimes, depending ...
Internationally the ISO sizes [6] are used with 14/23, 19/26 and 24/29 very common in research laboratories, with 24/29 the most common. In the US the ASTM sizes [7] (equal to the now obsolete Commercial Standard 21) are used with common sizes being 14/20, 19/22, 24/40 and somewhat 29/42. In the US 24/40 is most common.