Search results
Results from the WOW.Com Content Network
For gases, departure from 3 R per mole of atoms is generally due to two factors: (1) failure of the higher quantum-energy-spaced vibration modes in gas molecules to be excited at room temperature, and (2) loss of potential energy degree of freedom for small gas molecules, simply because most of their atoms are not bonded maximally in space to ...
Natural gas is a mixture of gases containing approximately 80% methane (CH 4) and its heating value varies from about or 10.1 to 11.4 kilowatt-hours per cubic metre (975 to 1,100 Btu/cu ft), depending on the mix of different gases in the gas stream. The volume of natural gas with heating value of one dekatherm is about 910 to 1,026 cubic feet ...
Natural uranium (0.7% U235) in light-water reactor: 443,000: 35%: Ta-180m isomer: 41,340: 689,964: Metallic hydrogen (recombination energy) 216 [2] Specific orbital energy of Low Earth orbit (approximate) 33.0: Beryllium + Oxygen: 23.9 [3] Lithium + Fluorine: 23.75 [citation needed] Octaazacubane potential explosive: 22.9 [4] Hydrogen + Oxygen ...
In all, the higher heating value of hydrogen is 18.2% above its lower heating value (142 MJ/kg vs. 120 MJ/kg). For hydrocarbons, the difference depends on the hydrogen content of the fuel. For gasoline and diesel the higher heating value exceeds the lower heating value by about 10% and 7%, respectively, and for natural gas about 11%.
The energy content (high or low heating value) of a volume of natural gas varies with the composition of the natural gas, which means there is no universal conversion factor for energy to volume. 1 cubic foot (28 litres) of average natural gas yields ≈ 1,030 Btu (between 1,010 Btu and 1,070 Btu, depending on quality, when burned)
Also the copy is blurred up enough to give you the impression that maybe what it really means is 1.36 W −1 cm −1 K −1 and 78.6 Btu hr −1 ft −1 F −1 and a type-head that got overdue for its cleaning since the secretary had a tall heap of papers on her desk and if that is the case then the multilingual expression is perfectly ...
Data from same reference as for liquid hydrogen. [21] High-pressure tanks weigh much more than the hydrogen they can hold. The hydrogen may be around 5.7% of the total mass, [22] giving just 6.8 MJ per kg total mass for the LHV. See note above about use in fuel cells. Hydrogen, gas (1 atm or 101.3 kPa, 25 °C) 141.86 (HHV) 119.93 (LHV) 0.011 88 ...
The Wobbe index is expressed in MJ/Nm³ (where 'Nm³' indicates'm³ in Normal conditions), or sometimes in BTU/scf.In the case of natural gas (molar mass 17 g/mol), the typical heating value is around 39 MJ/Nm³ (1,050 BTU/scf) and the specific gravity is approximately 0.59, giving a typical Wobbe index of 51 MJ/Nm³ (1,367 BTU/scf).