Search results
Results from the WOW.Com Content Network
Other sizes with a data sheet in IEC 60064 are A50, A55, A67, A68, A71, A75, and A80. Another common A-series light bulb type is the A15 bulb which is commonly used in the US for appliances and ceiling fans. The A15 bulb is 15 ⁄ 8 in (1 + 7 ⁄ 8 in; 48 mm) wide at its widest point and 3.39 inches tall.
These lamps are used for fluorescence effects where less visible light is ideal. 09 N/A Sun-tanning lamps: These lamps produce wide or narrow band UV-B radiation 10 BL Black-Light lamps: Black light lamps give off long-wave UV-A radiation of around 350-400 nm. They are often used to attract insects to traps.
The suffix after the G indicates the pin spread; the G dates to the use of Glass for the original bulbs. GU usually also indicates that the lamp provides a mechanism for physical support by the luminaire: in some cases, each pin has a short section of larger diameter at the end (sometimes described as a "peg" rather than a "pin" [2]); the socket allows the bulb to lock into place by twisting ...
GY6.35 & GZ6.35 – same as G6.35 and only denote what lamp mount clip is needed to hold the actual light bulb in place; G8 – 8 mm (0.31496 in) pin spacing GU8 – same as G8 and only denotes what lamp mount clip is needed to hold the actual light bulb in place; GY8.6 – 8.6 mm (0.33858 in) pin spacing; G9 – 9 mm (0.35433 in) pin spacing
230/240-volt incandescent light bulb with E27 screw base. Edison screw (ES) is a standard lightbulb socket for electric light bulbs. It was developed by Thomas Edison (1847–1931), patented in 1881, [1] and was licensed in 1909 under General Electric's Mazda trademark.
Download as PDF; Printable version; In other projects ... Light bulbs for automobiles are made in several standardized series. ... T5 size WY2.3W W2×4.6d 1 12 V: 2.3 ...
Under ECE regulations, H1 lamps are required to emit white or selective yellow light. [1] U.S. regulations require H1 lamps to emit white light. [2] Under both ECE and U.S. specifications, the allowable range of white light is quite large; some H1 lamps have a slight blue or yellow tint to the glass yet still produce light legally acceptable under the requirement for white light.
An incandescent lamp's light is thermal radiation, and the bulb approximates an ideal black-body radiator, so its color temperature is essentially the temperature of the filament. Thus a relatively low temperature emits a dull red and a high temperature emits the almost white of the traditional incandescent light bulb.