Search results
Results from the WOW.Com Content Network
The Autoglym brand was founded in 1965 by a UK Motor Trade entrepreneur Dennis Barley who developed a unique system for renovating used car paintwork. There were 11 products in the original range, including polishes, a sealant, a paint renovator and glass, interior, engine and wheel cleaners.
Do not copy this file to Wikimedia Commons. This image is believed to be non-free or possibly non-free in its home country, United Kingdom. In order for Commons to host a file, it must be free in its home country and in the United States.
French polishing a table. French polishing is a wood finishing technique that results in a very high gloss surface, with a deep colour and chatoyancy.French polishing consists of applying many thin coats of shellac dissolved in denatured alcohol using a rubbing pad lubricated with one of a variety of oils.
Screen printing is a printing technique where a mesh is used to transfer ink (or dye) onto a substrate, except in areas made impermeable to the ink by a blocking stencil.A blade or squeegee is moved across the screen in a "flood stroke" to fill the open mesh apertures with ink, and a reverse stroke then causes the screen to touch the substrate momentarily along a line of contact.
Nail polish remover is an organic solvent that may also include oils, scents, and coloring. Nail polish remover packages may include individual felt pads soaked in remover, a bottle of liquid remover used with a cotton ball or cotton pad, or a foam-filled container into which one inserts a finger and twists it until the polish comes off. The ...
When a more precise gloss would be misleading (for example, an aspectual marker that has multiple uses, or which is not sufficiently understood to gloss properly), but glossing it as its syntactic category would be ambiguous, the author may disambiguate with digits (e.g. ASP1 and ASP2 for a pair of aspect markers). Such pseudo-glossing may be ...
In order to compensate for the wafer bow, pressure can be applied to the wafer's backside which, in turn, will equalize the centre-edge differences. The pads used in the CMP tool should be rigid in order to uniformly polish the wafer surface. However, these rigid pads must be kept in alignment with the wafer at all times.
The removal of oxidization (tarnish) from metal objects is accomplished using a metal polish or tarnish remover; this is also called polishing. To prevent further unwanted oxidization, polished metal surfaces may be coated with wax, oil, or lacquer. This is of particular concern for copper alloy products such as brass and bronze. [2]