Search results
Results from the WOW.Com Content Network
According to the American Petroleum Institute (API), a standard barrel of oil is the amount of oil that would occupy a volume of exactly 1 barrel (158.99 L) at reference temperature and pressure conditions of 60 °F (15.6 °C) and 14.696 psi (1,013.25 hPa). This standard barrel of oil will occupy a different volume at different pressures and ...
Crude oil is classified as light, medium, or heavy according to its measured API gravity. Light crude oil has an API gravity higher than 31.1° (i.e., less than 870 kg/m 3) Medium oil has an API gravity between 22.3 and 31.1° (i.e., 870 to 920 kg/m 3) Heavy crude oil has an API gravity below 22.3° (i.e., 920 to 1000 kg/m 3)
Due to the higher density, diesel fuel offers a higher volumetric energy density: the density of EN 590 diesel fuel is defined as 0.820 to 0.845 kg/L (6.84 to 7.05 lb/US gal) at 15 °C (59 °F), about 9.0-13.9% more than EN 228 gasoline (petrol)'s 0.720–0.775 kg/L (6.01–6.47 lb/US gal) at 15 °C, which should be put into consideration when ...
Corn oil. Corn oil. Cookbook: Corn Oil. Plastic jugs in cardboard boxes, 15 kg each. Corn oil (North American) or maize oil (British) is oil extracted from the germ of corn (maize). Its main use is in cooking, where its high smoke point makes refined corn oil a valuable frying oil. It is also a key ingredient in some margarines.
In Canada, a teaspoon is historically 1⁄6 imperial fluid ounce (4.74 mL) and a tablespoon is 1⁄2 imperial fl oz (14.21 mL). In both Britain and Canada, cooking utensils come in 5 mL for teaspoons and 15 mL for tablespoons, hence why it is labelled as that on the chart. The volumetric measures here are for comparison only.
In light-water reactors, 1 kg of natural uranium – following a corresponding enrichment and used for power generation– is equivalent to the energy content of nearly 10,000 kg of mineral oil or 14,000 kg of coal. [16] Comparatively, coal, gas, and petroleum are the current primary energy sources in the U.S. [17] but have a much lower energy ...
Timken OK Load. Timken OK Load is a standardized measurement that indicates the possible performance of extreme pressure (EP) additives in a lubricating grease or oil. The units of measurement are pounds-force or kilograms-force. This measurement is performed using a special test machine and standard block and ring test specimens.
Break-bulk boats and barges were originally used to transport Pennsylvania oil in 40-US-gallon (150 L) wooden barrels. [9] But transport by barrel had several problems. The first problem was weight: they weighed 29 kilograms (64 lb), representing 20% of the total weight of a full barrel. [10]