Search results
Results from the WOW.Com Content Network
In addition to the descriptive steel grade naming system indicated above, within EN 10027-2 is defined a system for creating unique steel grade numbers. While less descriptive and intuitive than the grand names they are easier to tabulate and use in data processing applications.
UNS S17400 is ASTM grade 630, Cr-Ni 17-4PH precipitation hardened stainless steel; UNS S30400 is SAE 304, Cr/Ni 18/10, Euronorm 1.4301 stainless steel; UNS S31600 is SAE 316; UNS S31603 is 316L, a low carbon version of 316. The digits "03" were assigned since the maximum allowed carbon content is 0.03%; UNS C90300 is CDA 903
The SAE steel grades system is a standard alloy numbering system (SAE J1086 – Numbering Metals and Alloys) for steel grades maintained by SAE International.. In the 1930s and 1940s, the American Iron and Steel Institute (AISI) and SAE were both involved in efforts to standardize such a numbering system for steels.
Zeron 100 Super Duplex was born from a research project undertaken by Dr Cecil Roscoe at the University of Manchester, England. Tasked by his then employer – Mather+Platt – with studying the effect of various alloying additions on the mechanical properties and corrosion resistance of Zeron 25, he concluded that an optimum corrosion performance could be obtained from a duplex stainless ...
On certified steels, the plates are marked with the grade and a preceding "AB/", e.g. AB/A etc. [3] Yield point for all ordinary-strength ABS steels is specified as 34,000 psi (235 MPa ), except for ABS A in thicknesses of greater than 1 inch (25 mm) which has yield strength of 32,000 psi (225 MPa), and cold flange rolled sections, which have ...
Monel alloy 405, also known as Monel R405, is the free-machining grade of alloy 400. [26] The nickel, carbon, manganese, iron, silicon & copper percent remains the same as alloy 400, but the sulfur is increased from 0.024 max to 0.025-0.060%.
Typically Grade EN 1.4462 (also called 2205). It is typical of the mid-range of properties and is perhaps the most used today Super-duplex (PREN range: 38–45) Typically grade EN 1.4410 up to so-called hyper duplex grades (PREN: >45) developed later to meet specific demands of the oil and gas as well as those of the chemical industries.
It is specified by SAE International as part of its SAE steel grades. It is also known as: [3] 4301-304-00-I and X5CrNi18-9, the ISO 15510 name and designation. UNS S30400 in the unified numbering system. A2 stainless steel outside the US, in accordance with ISO 3506 for fasteners. [4]