Search results
Results from the WOW.Com Content Network
In addition, there is a basic layer-3 aggregation [20] that allows servers with multiple IP interfaces on the same network to perform load balancing, and for home users with more than one internet connection, to increase connection speed by sharing the load on all interfaces. [21]
Jumbo frames can increase the efficiency of Ethernet and network processing in hosts by reducing the protocol overhead, as shown in the following example with TCP over IPv4. The processing overhead of the hosts can potentially decrease by the ratio of the payload sizes (approximately six times improvement in this example).
Ethernet variant Minimum transmitted IPG Minimum received IPG 10 Mbit/s Ethernet: 9.6 μs: 4.7 μs (47 bit times) 100 Mbit/s (Fast) Ethernet: 0.96 μs: 0.96 μs (96 bit times) [3] [dubious – discuss] Gigabit Ethernet: 96 ns: 64 ns (64 bit times) 2.5 Gigabit Ethernet: 38.4 ns: 16 ns (40 bit times) 5 Gigabit Ethernet: 19.2 ns: 8 ns (40 bit ...
Ethernet over USB is the use of a USB link as a part of an Ethernet network, resulting in an Ethernet connection over USB (instead of e.g. PCI or PCIe).. USB over Ethernet (also called USB over Network or USB over IP) is a system to share USB-based devices over Ethernet, Wi-Fi, or the Internet, allowing access to devices over a network.
With the normal untagged Ethernet frame overhead of 18 bytes and the 1500-byte payload, the Ethernet maximum frame size is 1518 bytes. If a 1500-byte IP packet is to be carried over a tagged Ethernet connection, the Ethernet frame maximum size needs to be 1522 bytes due to the larger size of an 802.1Q tagged frame.
cFosSpeed is a traffic shaping software often bundled with MSI motherboards for the Windows operating system. The program attaches itself as a device driver to the Windows network stack where it performs packet inspection and layer-7 protocol analysis. It has been noted as causing some issues with network connections, and can be difficult to ...
10BASE2 (also known as cheapernet, [1] thin Ethernet, thinnet, and thinwire) is a variant of Ethernet that uses thin coaxial cable terminated with BNC connectors to build a local area network. During the mid to late 1980s, this was the dominant 10 Mbit/s Ethernet standard.
IEEE 802.3 is a working group and a collection of standards defining the physical layer and data link layer's media access control (MAC) of wired Ethernet.The standards are produced by the working group of Institute of Electrical and Electronics Engineers (IEEE).