Search results
Results from the WOW.Com Content Network
The boot ROM of NXP systems on a chip (SOCs) support configuring the peripherals through specific pins of the system on a chip. On the i.MX6 family it also supports configuring the boot order through efuses. The boot ROM of several NXP SoCs have many ways to load the first stage bootloader (from eMMC, microSD, USB, etc.).
Typically, the system firmware (UEFI or BIOS) will allow the user to configure a boot order. If the boot order is set to "first, the DVD drive; second, the hard disk drive", then the firmware will try to boot from the DVD drive, and if this fails (e.g. because there is no DVD in the drive), it will try to boot from the local hard disk drive.
Once all the boot and system drivers have been loaded, the kernel starts the session manager (smss.exe), which begins the login process. After the user has successfully logged into the machine, winlogon applies User and Computer Group Policy setting and runs startup programs declared in the Windows Registry and in "Startup" folders.
The reset vector for MIPS32 processors is at virtual address 0xBFC00000, [11] which is located in the last 4 Mbytes of the KSEG1 non-cacheable region of memory. [12] The core enters kernel mode both at reset and when an exception is recognized, hence able to map the virtual address to physical address.
A modern PC with a bus rate of around 1 GHz and a 32-bit bus might be 2000x or even 5000x faster, but might have many more GB's of memory. With boot times more of a concern now than in the 1980s, the 30- to 60-second memory test adds undesirable delay for a benefit of confidence that is not perceived to be worth that cost by most users.
When booting, the loader portion of NTLDR does the following in order: Accesses the file system on the boot drive (either FAT or New Technology File System, NTFS). If Windows was put in the hibernation state, the contents of hiberfil.sys are loaded into memory and the system resumes where it left off.
The BIOS does not interpret the contents of the boot sector other than to possibly check for the boot sector signature in the last two bytes. Interpretation of data structures like partition tables and BIOS Parameter Blocks is done by the boot program in the boot sector itself or by other programs loaded through the boot process.
When GRUB is installed on a hard disk, boot.img is written into the boot sector of that hard disk. boot.img has a size of only 446 bytes. A boot sector is the sector of a persistent data storage device (e.g., hard disk , floppy disk , optical disc , etc.) which contains machine code to be loaded into random-access memory (RAM) and then executed ...