Ads
related to: standard sizes for woodworking plans
Search results
Results from the WOW.Com Content Network
In 1961, at a meeting in Scottsdale, Arizona, the Committee on Grade Simplification and Standardization agreed to what is now the current U.S. standard: in part, the dressed size of a 1-inch (nominal) board was fixed at 3 ⁄ 4 inch; while the dressed size of 2 inch (nominal) lumber was reduced from 1 + 5 ⁄ 8 inch to the current 1 + 1 ⁄ 2 inch.
A jack plane is a general-purpose woodworking bench plane, used for dressing timber down to size in preparation for truing and/or edge jointing. It is usually the first plane used on rough stock, but for rougher work it can be preceded by the scrub plane. [1] The versatility of the jack plane has led to it being the most common bench plane in use.
A block plane is frequently used for paring end grain. This is possible because a block plane has its blade set at a shallow bed angle, allowing the blade to slice through end grain more efficiently; furthermore, for this to work, the plane is frequently held at an angle sometimes as much as 45 degrees to the direction of travel, so that the cutting edge slices the wood fibers as they pass ...
The Christiania standard was 5 ⁄ 8 of the Petersburg standard, making it 103.125 cubic feet. [3] The Swedish standard hundred was 121 boards of 14 feet long, 3 inches thick and 9 inches wide, making 317.625 cubic feet. [5] The Norwegian standard hundred was 120 boards of 12 feet long, 3 inches thick and 9 inches wide, making 270 cubic feet. [5]
The wood is categorized as a board if its width is less than 2 + 1 ⁄ 2 in (64 mm), and its thickness is less than 1 + 1 ⁄ 2 in (38 mm). A plank used in a building as a horizontal supporting member that runs between foundations, walls, or beams to support a ceiling or floor is called a joist.
[citation needed] PSL can be made from any wood species, but Douglas fir, southern pine, western hemlock, and yellow poplar are commonly chosen [9] because of their superior strength. The product is manufactured as a 12-by-12-inch (300 mm × 300 mm) or 12-by-18-inch (300 mm × 460 mm) billet in a rectangular cross-section, which is then ...
Ads
related to: standard sizes for woodworking plans