Ad
related to: wilwood brake proportioning valve location guide pdf
Search results
Results from the WOW.Com Content Network
A cross-section of a proportioning safety valve. A proportioning valve is a valve that relies on the laws of fluid pressure to distribute input forces to one or more output lines. Proportioning valves are frequently used in cars and other road vehicles to reduce the brake fluid pressure to the rear brakes. Due to weight distribution during ...
The brake balance or brake bias of a vehicle is the distribution of brake force at the front and rear tires, and may be given as the percentage distributed to the front brakes (e.g. 52%) [1] or as the ratio of front and rear percentages (e.g. 52/48). [2]
The pressure of the rear wheels are approximated to the ideal brake force distribution in a partial braking operation. To do so, the conventional brake design is modified in the direction of rear axle overbraking, and the components of the ABS are used. EBD reduces the strain on the hydraulic brake force proportioning valve in the vehicle.
The driver's brake pedal simply controls a valve to bleed pressure into the brake units at the wheels, rather than actually creating the pressure in a master cylinder by depressing a piston. This form of brake is analogous to an air brake system but with hydraulic fluid as the working medium rather than air.
There is a valve in the brake line of each brake controlled by the ABS. On some systems, the valve has three positions: In position one, the valve is open; pressure from the master cylinder is passed right through to the brake. In position two, the valve blocks the line, isolating that brake from the master cylinder.
The typical compression brake consists of a hydraulic system using engine oil which transfers the motion of the fuel injector rocker arm to the engine's exhaust valve(s). When activated, the exhaust valve opens very briefly near the engine's top dead center , and releases the compressed air in the cylinder so that the air compression energy is ...
The train brakes are released by admitting reduced and regulated main reservoir air pressure to the brake pipe through the engineer's automatic brake valve. In America, a fully charged brake pipe typically operates at 90 psi (6.2 bar; 620 kPa) for freight trains and 110 psi (7.6 bar; 760 kPa) for passenger trains. [7]
When the brake pipe and car components are charged with air, the brakes release. When the engineer needs to make a brake application, control valves in the locomotive reduce the brake pipe pressure. As the brake pipe pressure is reduced, the service portions on each car divert air from their reservoirs to their brake cylinders.
Ad
related to: wilwood brake proportioning valve location guide pdf