Search results
Results from the WOW.Com Content Network
In addition to the mapping of localhost to the loopback addresses (127.0.0.1 and ::1), localhost may also be mapped to other IPv4 (loopback) addresses and it is also possible to assign other, or additional, names to any loopback address. The mapping of localhost to addresses other than the designated loopback address range in the hosts file or ...
There are two primary types of IP addresses in use today: IP version 4 (IPv4) and IP version 6 (IPv6). The former has been around since January 1983, and is still the most common. These are 32-bit ...
Used for link-local addresses [5] between two hosts on a single link when no IP address is otherwise specified, such as would have normally been retrieved from a DHCP server 172.16.0.0/12 172.16.0.0–172.31.255.255
The Internet Engineering Task Force (IETF) has reserved the IPv4 address block 169.254.0.0 / 16 (169.254.0.0 – 169.254.255.255) for link-local addressing. [1] The entire range may be used for this purpose, except for the first 256 and last 256 addresses (169.254.0.0 / 24 and 169.254.255.0 / 24), which are reserved for future use and must not be selected by a host using this dynamic ...
In support of link-local multicasts which do not use IGMP, any IPv4 multicast address that falls within the *.0.0.0 / 24 and *.128.0.0 / 24 ranges will be broadcast to all ports on many Ethernet switches, even if IGMP snooping is enabled, so addresses within these ranges should be avoided on Ethernet networks where the functionality of IGMP ...
nslookup operates in interactive or non-interactive mode. When used interactively by invoking it without arguments or when the first argument is - (minus sign) and the second argument is a hostname or Internet address of a name server, the user issues parameter configurations or requests when presented with the nslookup prompt (>). When no ...
The name localhost is a commonly defined hostname for the loopback interface in most TCP/IP systems, resolving to the IP addresses 127.0.0.1 in IPv4 and ::1 for IPv6.As a top-level domain, the name has traditionally been defined statically in host DNS implementations with address records (A and AAAA) pointing to the same loopback addresses.
Various Internet Engineering Task Force (IETF) standards reserve the IPv4 address block 127.0.0.0 / 8, in CIDR notation and the IPv6 address ::1 / 128 for this purpose. The most common IPv4 address used is 127.0.0.1. Commonly these loopback addresses are mapped to the hostnames localhost or loopback.