Search results
Results from the WOW.Com Content Network
Coatings of moderate thickness 1.8 μm to 25 μm (0.00007" to 0.001") [16] are known as Type II in North America, as named by MIL-A-8625, while coatings thicker than 25 μm (0.001") are known as Type III, hard-coat, hard anodizing, or engineered anodizing. Very thin coatings similar to those produced by chromic anodizing are known as Type IIB.
A current passes from the anode, where metal on the surface is oxidised and dissolved in the electrolyte, to the cathode. At the cathode, a reduction reaction occurs, which normally produces hydrogen. Electrolytes used for electropolishing are most often concentrated acid solutions such as mixtures of sulfuric acid and phosphoric acid.
Hexavalent chromium plating solution is used for both decorative and hard plating, as well as bright dipping of copper alloys, chromic acid anodizing, and chromate conversion coating. [2] A typical hexavalent chromium plating process is: Activation bath; Chromium bath; Rinse; Second rinse
Porous AAO is formed by electrochemical oxidation (anodization) of aluminum in acid electrolytes in the conditions that balance the growth and the AAO films are formed with limited thickness. Anodizing aluminum has been widely used since early last century for corrosion protection and decorative purposes.
Chemical coloring of metals is the process of changing the color of metal surfaces with different chemical solutions. The chemical coloring of metals can be split into three types: electroplating – coating the metal surface with another metal using electrolysis. patination – chemically reacting the metal surface to form a colored oxide or ...
Electroless nickel-boron coating (often called NiB coating) is a metal plating process that can create a layer of a nickel-boron alloy on the surface of a solid substrate, like metal or plastic. The process involves dipping the substrate in a water solution containing nickel salt and a boron-containing reducing agent , such as an ...
The layer is strongly adherent to the metal surface, and it will regrow quickly if scratched off. In conventional anodizing, this layer of oxide is grown on the surface of the metal by the application of electrical potential, while the part is immersed in an acidic electrolyte. In plasma electrolytic oxidation, higher potentials are applied ...
Profile increases the effective surface area of the steel. The cleanliness achieved is assessed to ISO 8501-1 grades: these originated from a set of photographic slides in a Swedish standard (SIS) showing exemplars of the common terminology of white-metal, near white-metal, etc. Typically, SA 2½ is used for pipelines (equivalent to NACE N°2).