Search results
Results from the WOW.Com Content Network
Enterprise-class drives can have a height up to 15 mm. Seagate released a 7 mm drive aimed at entry level laptops and high end netbooks in December 2009. Western Digital released on April 23, 2013 a hard drive 5 mm in height specifically aimed at Ultrabooks. [37] Toshiba MK1216GSG 1.8" 120 GB hard disk drive with Micro SATA
Leonardo da Vinci drew the Vitruvian Man within a square of side 1.83 m (6 ft 0 in) and a circle about 1.2 m (3 ft 11 in) in radius. To help compare different orders of magnitude , this section lists lengths between one meter and ten meters.
The maximum height, width, and length of general Chinese rolling stock are 4,800 mm (15 ft 9 in), 3,400 mm (11 ft 2 in) and 26 m (85 ft 4 in) respectively, with an extra out-of-gauge load allowance of height and width 5,300 by 4,450 mm (17 ft 5 in by 14 ft 7 in) with some special shape limitation, corresponding to a structure gauge of 5,500 by ...
Longer bridges can reduce the width of both shoulders to 4 feet (1.2 m). Existing bridges can remain part of the Interstate system if they have at least 12-foot-wide (3.7 m) lanes with 3.5-foot (1.1 m) shoulder on the left and a 10-foot (3.0 m) shoulder on the right, except that longer bridges can have 3.5 feet (1.1 m) shoulders on both sides.
The taper rate for all NPT threads is 1 inch of diameter in 16 inches of length (3 ⁄ 4 inch per foot or 62.5 millimeters per meter) measured by the change of diameter (of the pipe thread) over distance of thread.
Smaller tables, approximately 10 ft by 5 ft down to half size, are also sometimes used in pubs, homes and smaller snooker halls. The height from the floor to the top of the cushion is between 2 ft 9.5 in and 2 ft 10.5 in (851 mm and 876 mm). [10]
The standard wheelbase cargo bed is 8 feet wide by 12 feet long (2.4 × 3.6 m), with only 7.25 feet of this width being flat floorspace between the stake-pockets, the tailgate rising 16 inches above the floor and the side-walls/stake-pockets rising 12 inches above the floor.
In the US, size names are often denoted with a code of the format nR, where the number n represents the length of the shorter edge in inches. In the normal series, the long edge is the length of the short edge plus 2 inches (10 in or less) or 3 inches (11 in and above).