Search results
Results from the WOW.Com Content Network
The Pontiac G6 is a mid-size car that was produced by General Motors under the Pontiac brand. It was introduced in 2004 for the 2005 model year to replace the Grand Am . The G6 shared the GM Epsilon platform with the Chevrolet Malibu , Saab 9-3 , and other General Motors vehicles.
Its first use in a North American application was the Pontiac G6 for the 2006 model year. It is also used in some Saab 9-3 and 9-5 models. It is a three-axis design, with first, second, fifth, and sixth gears on an output shaft behind and below the input shaft, and third and fourth gears are on an output shaft in front of and above the input shaft.
The High Value engine family from General Motors is a group of cam-in-block or overhead valve V6 engines.These engines feature cast iron blocks and aluminum heads, and use the same 60° vee bank as the 60° V6 family they are based on, but the new 99 mm (3.90 in) bore required offsetting the bores by 1.5 mm (0.059 in) away from the engine center line.
The 400.9-cubic-inch (6.6 L) 401 had a 4.875 in × 3.58 in (123.8 mm × 90.9 mm) bore and stroke. [ 12 ] [ 17 ] It produced 210 hp (157 kW) gross at 3400 RPM and 377 lb⋅ft (511 N⋅m) gross torque at 1400 RPM, while the Magnum version introduced in 1966 produced 237 hp (177 kW) gross at 4000 RPM and 372 lb⋅ft (504 N⋅m) gross torque at ...
They are commonly identified by the first three (319) or last three (291 for the 360-401 heads; 304 used a different casting) digits of the casting number. There was a U.S. auto industry-wide shift to lower compression ratios in mid-1971, so AMC increased combustion chamber size to 58-59 cc.
Parts for Ram Air V engines are not readily available. The cylinder heads on the 400 CID version had an intake port volume of 290 cc (17.70 cu in), nearly twice the size of a typical standard D-port Pontiac head - and flowed in the area of 315 cu ft/min (8.9 m 3 /min) at 0.8 in (20 mm) valve lift; in the realm of the NASCAR-dominating Chrysler ...
Jeep CJ; Jeep Wagoneer/Grand Wagoneer; Kaiser Jeep was purchased by AMC in 1970. The Buick 350 cu in (5.7 L) V8, AMC 232 I6, and AMC 327, 360 V8 engines in the FSJ Wagoneer and trucks used a 'nailhead' pattern TH400—also known as a "unipattern," as it was used by many other manufacturers (including Rolls-Royce and Jaguar) with an adapter ring—from 1965 to 1972.
The GM–Ford 6-speed automatic transmission is an automatic transaxle originally designed for transverse engine applications in cars. With design work having begun in 2002, General Motors and Ford Motor Company jointly committed to investing US$720 million in their manufacturing plants to support the new transmission.