Search results
Results from the WOW.Com Content Network
30 mm 2 area 1/2.3" original Pentax Q (5.6 crop factor). ... This "inch" system gives a result approximately 1.5 times the length of the diagonal of the sensor.
The optical format is approximately the diagonal length of the sensor multiplied by 3/2. The result is expressed in inches and is usually (but not always) rounded to a convenient fraction. For instance, a 6.4x4.8 mm sensor has a diagonal of 8.0 mm and therefore an optical format of 8.0*3/2 = 12 mm, which is expressed as 1 ⁄ 2 inch in imperial ...
For example, for the 4/3 format, a 12 mm lens is a wide-angle lens and will have a retrofocus design. For the 2/3-inch format, a 12 mm lens is "normal" and can have a simple and fast double Gauss layout. For the 1/3-inch format, a 12 mm lens is long and can have a telephoto design.
A 50 mm lens on an APS-C format (crop factor 1.6) images a slightly smaller field of view than a 70 mm lens on a 35 mm camera. The terms crop factor and focal length multiplier were coined to help 35 mm film format SLR photographers understand how their existing ranges of lenses would perform on newly introduced DSLR cameras which had sensors smaller than the 35 mm film format, but often ...
The typical range lies between 1 ⁄ 2 to 2 ⁄ 3 inch (12.7 to 16.9 mm) for the UK/US size system and 4 ⁄ 3 to 5 ⁄ 3 cm (13.3 to 16.7 mm) for the European size system, but may extend to 1 ⁄ 4 to 3 ⁄ 4 inch (6.4 to 19.1 mm) and 2 ⁄ 3 to 6 ⁄ 3 cm (6.7 to 20.0 mm).
Fine julienne; measures approximately 1 ⁄ 16 by 1 ⁄ 16 by 1–2 inches (0.2 cm × 0.2 cm × 3 cm–5 cm), and is the starting point for the fine brunoise cut. [ 1 ] Chiffonade ; rolling leafy greens and slicing the roll in sections from 4–10mm in width
They use a "scale" appropriate to the original prototype modelling both standard and narrow gauge locomotives to run on 2.5-inch track. -1:16: 3 + 1 ⁄ 2 in (89 mm) A worldwide garden railroad scale. Corresponds to NEM III and NMRA 3 ⁄ 4 inch. -1:12: 4 + 3 ⁄ 4 in (121 mm)
Sizes that may interchange, depending on the precision needed, include 2 mm (close to 5 ⁄ 64 inch (1.98 mm)), 4 mm (close to 5 ⁄ 32 inch (3.97 mm)) and 8 mm (close to 5 ⁄ 16 inch (7.94 mm)). In reality, a wrench with a width across the flats of exactly 15 mm would fit too tightly to use on a bolt with a width across the flats of 15 mm.