Search results
Results from the WOW.Com Content Network
Surveyor's view of the levelling rod with the crosshair. This indicates a reading of 1.422 m, interpolated between the 1.420 m and 1.430 m marks. Rods come in two classes: Self-reading rods (sometimes called speaking rods). Target rods. Self-reading rods are rods that are read by the person viewing the rod through the telescope of the instrument.
The top mark is at 1,500 mm and the lower is at 1,345 mm; the distance between those two marks is 155 mm, yielding a distance to the rod of 15.5 m. Optical levelling, also known as spirit levelling and differential levelling, employs an optical level, which consists of a precision telescope with crosshairs and stadia marks.
This page was last edited on 30 August 2007, at 05:30 (UTC).; Text is available under the Creative Commons Attribution-ShareAlike 4.0 License; additional terms may ...
The rod is used in levelling procedures to determine elevations and is read using a level. A Philadelphia rod consists of two sliding sections graduated in hundredths of a foot. On the front of the rod the graduation increasing from zero at the bottom. On the back of the rod the graduation decrease from 13.09 ft at the bottom to 7 ft.
Common levelling instruments include the spirit level, the dumpy level, the digital level, and the laser level. Levelling staff – specialized measuring stick or vertical staff used with the dumpy level, held by a second person while the operator of the level looks through it and takes readings off of the staff. Also call a rod. Reduced level ...
An Ordnance Survey cut mark in the UK Occasionally a non-vertical face, and a slightly different mark, was used. The term benchmark, bench mark, or survey benchmark originates from the chiseled horizontal marks that surveyors made in stone structures, into which an angle iron could be placed to form a "bench" for a leveling rod, thus ensuring that a leveling rod could be accurately ...
The level must be horizontal to get a valid measurement. Because of this, if the horizontal crosshair of the instrument is lower than the base of the rod, the surveyor will not be able to sight the rod and get a reading. The rod can usually be raised up to 25 feet (7.6 m) high, allowing the level to be set much higher than the base of the rod.
The Y level or wye level is the oldest and bulkiest of the older style optical instruments. A low-powered telescope is placed in a pair of clamp mounts, and the instrument then leveled using a spirit level, which is mounted parallel to the main telescope. The term dumpy level (also builder's level) endures despite the evolution in design. They ...