Search results
Results from the WOW.Com Content Network
The gas-lift mandrel is a device installed in the tubing string of a gas-lift well onto which or into which a gas-lift valve is fitted. There are two common types of mandrels. In a conventional gas-lift mandrel, a gas-lift valve is installed as the tubing is placed in the well. Thus, to replace or repair the valve, the tubing string must be pulled.
Petroleum production engineers design and select subsurface equipment to produce oil and gas well fluids. [1] They often are degreed as petroleum engineers, although they may come from other technical disciplines (e.g., mechanical engineering, chemical engineering, physicist) and subsequently be trained by an oil and gas company.
This calculation is at sea level at 0 °C. For higher altitudes, or higher temperatures, the amount of lift will decrease proportionally to the air density, but the ratio of the lifting capability of hydrogen to that of helium will remain the same. This calculation does not include the mass of the envelope need to hold the lifting gas.
A pulser pump makes use of water that flows through pipes and an air chamber from an upper reservoir to a lower reservoir. The intake is a trompe, which uses water flow to pump air to a separation chamber; air trapped in the chamber then drives an airlift pump.
Slickline is more commonly used in production tubing. The wireline operator monitors at surface the slickline tension via a weight indicator gauge and the depth via a depth counter 'zeroed' from surface, lowers the downhole tool to the proper depth, completes the job by manipulating the downhole tool mechanically, checks to make sure it worked if possible, and pulls the tool back out by ...
The stages of operation of a plunger lift. A plunger lift is an artificial lift method of deliquifying a natural gas well.A plunger is used to remove contaminants from productive natural gas wells, such as water (in liquid, mist, or ice forms), sand, oil and wax.
Gas initially in place (GIIP) or original gas in place (OGIP) denote the total estimated quantity (volume) of natural gas contained in a "subsurface" asset prior to extraction . [ 1 ] Gas Initially In Place = Gross Rock Volume * Net/Gross * Porosity * average initial Gas Saturation / Formation Volume Factor [ 2 ]
A gas lift chair is a form of office chair that allows the user to modify their height in relation to the height of a desk, leading to an increase in comfort and ergonomic benefit. A patent describing a common configuration of a gas lift cylinder by John Wang, published 20 May 1989.