Search results
Results from the WOW.Com Content Network
The 224-cubic-inch (3.67 L) engine, the larger engine in this family, was introduced in 1917 for the 1918 model year and used only in the Series FA and FB. It had the same bore as the 171, but a longer stroke of 5 + 1 ⁄ 4 in (133 mm), giving it 37 horsepower (28 kW) at 2,000 rpm. Applications: 1918 Chevrolet Series FA (37 hp; 28 kW) [7]
The ZZ632's iron block shares a mold with Chevrolet Performance's ZZ572 crate engines, but the castings are machined to accommodate the huge 632 cubic-inch displacement. The bore grows by 0.040 in (1.0 mm), compared to the 572-cubic-inch V8s, with most of the displacement gain coming from a stroke that is 0.375 in (9.5 mm) longer.
Engine displacement is the measure of the cylinder volume swept by all of the pistons of a piston engine, excluding the combustion chambers. [1] It is commonly used as an expression of an engine's size, and by extension as an indicator of the power (through mean effective pressure and rotational speed ) an engine might be capable of producing ...
Although it had had a larger displacement than its 261-cubic-inch (4.3 L) Stovebolt predecessor it was approximately 2 inches (51 mm) shorter and 1 ⁄ 4 inch (6.4 mm) lower. [54] Flywheel bolt pattern is the same as the six and V8, with 1 ⁄ 2 inch (12.7 mm) bolts for the flywheel if produced after the 1966 model year.
The 477-cubic-inch (7.8 L) 477 was released late in the 1940 model year, replacing the 451. It was the largest in the GMC straight-6 line until it was replaced by the 503 in 1950. It shares the same 5 inches (130 mm) stroke as the 426 and 451, with a 4 + 1 ⁄ 2 inches (110 mm) bore. It produced a maximum 154 hp @ 2600 rpm and 385 lb•ft ...
The gross power and torque outputs decreased to 72 hp (54 kW; 73 PS) and 112 lb⋅ft (152 N⋅m), respectively, when the engine had a 6.9:1 compression ratio. Bore and stroke dimensions were the same as the L-head engine at 3 + 1 ⁄ 8 x 4 + 3 ⁄ 8 inches, giving 134.2 cu in (2,199 cc). [3] The F4-134 was introduced in 1950 in the Jeep Truck. [4]
The 71 refers to the displacement in cubic inches of each cylinder. [1] The firing order of the engine is 1-5-3-6-2-4. [1] The engine's compression ratio is 18.7:1 with a 4.250 inch bore and a 5.00 inch stroke. [1] The engine weighs 2,185 lb (991 kg) and is 54 inches long, 29 inches wide and 41 inches tall. [1]
The largest engine derived from the series was a 702-cubic-inch (11.5 L) "Twin Six" V12, which had a unique block and crankshaft, but shared many exterior parts with the 351. Diesel versions of the 351, 478 and 637, advertised as the ToroFlow , were also manufactured.