Search results
Results from the WOW.Com Content Network
In the standard system the conversion is that 1 gallon = 231 cubic inches and 1 inch = 2.54 cm, which makes a gallon = 3785.411784 millilitres exactly. For nutritional labeling on food packages in the US, the teaspoon is defined as exactly 5 ml, [22] giving 1 gallon = 3840 ml exactly. This chart uses the former.
≡ 4.546 09 L: ≡ 4.546 09 × 10 −3 ... [Converter 1] approximately 365. ... 1 ⁄ 100 of the energy required to warm one gram of air-free water from 0 °C to 100 ...
{{convert|100|lb|kg}} → 100 pounds (45 kg) The unit-codes should be treated as case-sensitive: {{convert|100|Mm|mm}} → 100 megametres (1.0 × 10 11 mm) The output of {{convert}} can display multiple converted units, if further unit-codes are specified after the second unnamed parameter (without the pipe separator). Typical combination ...
Taiwan, like Korea, saw its traditional units standardized to Japanese values and their conversion to a metric basis, such as the Taiwanese ping of about 3.306 m 2 based on the square ken. The Hong Kong SAR continues to use its traditional units , now legally defined based on a local equation with metric units.
The litre (Commonwealth spelling) or liter (American spelling) (SI symbols L and l, [1] other symbol used: ℓ) is a metric unit of volume. It is equal to 1 cubic decimetre (dm 3 ), 1000 cubic centimetres (cm 3 ) or 0.001 cubic metres (m 3 ).
The energy content of ethanol is 76,100 BTU/US gal (5.89 kilowatt-hours per litre), compared to 114,100 BTU/US gal (8.83 kWh/L) for gasoline. (see chart above) A flex-fuel vehicle will experience about 76% of the fuel mileage MPG when using E85 (85% ethanol) products as compared to 100% gasoline.
Normality is defined as the number of gram or mole equivalents of solute present in one liter of solution.The SI unit of normality is equivalents per liter (Eq/L). = where N is normality, m sol is the mass of solute in grams, EW sol is the equivalent weight of solute, and V soln is the volume of the entire solution in liters.
The factor–label method can convert only unit quantities for which the units are in a linear relationship intersecting at 0 (ratio scale in Stevens's typology). Most conversions fit this paradigm. An example for which it cannot be used is the conversion between the Celsius scale and the Kelvin scale (or the Fahrenheit scale). Between degrees ...