Search results
Results from the WOW.Com Content Network
T-S diagram of a station in the North Pacific. In oceanography, temperature-salinity diagrams, sometimes called T-S diagrams, are used to identify water masses.In a T-S diagram, rather than plotting each water property as a separate "profile," with pressure or depth as the vertical coordinate, potential temperature (on the vertical axis) is plotted versus salinity (on the horizontal axis).
Concrete has a very low coefficient of thermal expansion, and as it matures concrete shrinks. All concrete structures will crack to some extent, due to shrinkage and tension. Concrete which is subjected to long-duration forces is prone to creep. The density of concrete varies, but is around 2,400 kilograms per cubic metre (150 lb/cu ft). [1]
A minimum temperature of 5 °C is recommended, and no more than 30 °C. [51] The concrete at young age must be protected against water evaporation due to direct insolation, elevated temperature, low relative humidity and wind. The interfacial transition zone (ITZ) is a region of the cement paste around the aggregate particles in concrete.
AAC is well suited for high-rise buildings and those with high temperature variations. [24] Due to its lower density, high-rise buildings constructed using AAC require less steel and concrete for structural members. The mortar needed for laying AAC blocks is reduced due to the lower number of joints.
A pallet of "8-inch" concrete blocks An interior wall of painted concrete blocks Concrete masonry blocks A building constructed with concrete masonry blocks. A concrete block, also known as a cinder block in North American English, breeze block in British English, concrete masonry unit (CMU), or by various other terms, is a standard-size rectangular block used in building construction.
A concrete slab is a common structural element of modern buildings, consisting of a flat, horizontal surface made of cast concrete. Steel- reinforced slabs, typically between 100 and 500 mm thick, are most often used to construct floors and ceilings, while thinner mud slabs may be used for exterior paving ( see below ).
Concrete obtained with higher w/c ratio or obtained with an incorrect curing process presents higher porosity at hardened state, and is therefore subjected to a higher carbonation rate. The influencing factors concerning the exposure conditions are the environmental temperature, humidity and concentration of CO 2 .
The density of surface seawater ranges from about 1020 to 1029 kg/m 3, depending on the temperature and salinity. At a temperature of 25 °C, the salinity of 35 g/kg and 1 atm pressure, the density of seawater is 1023.6 kg/m 3. [7] [8] Deep in the ocean, under high pressure, seawater can reach a density of 1050 kg/m 3 or higher. The density of ...