Ads
related to: navac vacuum pump cordless parts
Search results
Results from the WOW.Com Content Network
Single-stage vacuum pumps typically produce vacuum to 35 torr (mm Hg) or 47 millibars (4.7 kPa), and two-stage pumps can produce vacuum to 25 torr, assuming air is being pumped and the ring-liquid is water at 15 °C (59 °F) or less. Dry air and 15 °C sealant-water temperature is the standard performance basis, which most manufacturers use for ...
The NEG acts as a getter or getter pump that is able to reduce the pressure to less than 10 −12 mbar. Non-evaporable getters , which work at high temperature, generally consist of a film of a special alloy, often primarily zirconium ; the requirement is that the alloy materials must form a passivation layer at room temperature which ...
The Roots blower is one example of a vacuum pump. A vacuum pump is a type of pump device that draws gas particles from a sealed volume in order to leave behind a partial vacuum. The first vacuum pump was invented in 1650 by Otto von Guericke, and was preceded by the suction pump, which dates to antiquity. [1]
The sorption pump is a vacuum pump that creates a vacuum by adsorbing molecules on a very porous material like molecular sieve which is cooled by a cryogen, typically liquid nitrogen. The ultimate pressure is about 10 −2 mbar. With special techniques this can be lowered till 10 −7 mbar.
A turbomolecular pump is a type of vacuum pump, superficially similar to a turbopump, used to obtain and maintain high vacuum. [ 1 ] [ 2 ] These pumps work on the principle that gas molecules can be given momentum in a desired direction by repeated collision with a moving solid surface.
Most general pumps can increase as well as decrease the pressure of a gas; however, this category contains pumps that are usually exclusively used to decrease pressure. Wikimedia Commons has media related to Vacuum pumps .
An oil diffusion pump is used to achieve higher vacuum (lower pressure) than is possible by use of positive displacement pumps alone. Although its use has been mainly associated within the high-vacuum range, down to 1 × 10 −9 mbar (1 × 10 −7 Pa), diffusion pumps today can produce pressures approaching 1 × 10 −10 mbar (1 × 10 −8 Pa) when properly used with modern fluids and accessories.
In vacuum applications, a cold trap is a device that condenses all vapors except the permanent gases (hydrogen, oxygen, and nitrogen) into a liquid or solid. [2] [needs update] The most common objective is to prevent vapors being evacuated from an experiment from entering a vacuum pump where they would condense
Ads
related to: navac vacuum pump cordless parts