Ads
related to: argon vs nitrogen welding helmet pros and cons youtube tv- Lincoln
Huge Variety Of Lincoln Brand
Welding Machines At The Best Prices
- MIG Welders
Huge Variety Of MIG Welders
At The Best Prices
- Lincoln
Search results
Results from the WOW.Com Content Network
A-25 (25% argon/75% helium) is used for nonferrous base when higher heat input and good weld appearance are needed. A-50 (50% argon/50% helium) is used for nonferrous metals thinner than 0.75 inch for high-speed mechanized welding. A-75 (75% argon/25% helium) is used for mechanized welding of thick aluminium. Reduces weld porosity in copper. [14]
A welding helmet in use. A welding helmet is a piece of personal protective equipment used by welders to protect the user from concentrated light and flying particles. Different welding processes need stronger lens shades with auto-darkening filters, while goggles suffice for others.
Argon is preferred to less expensive nitrogen in cases where nitrogen may react with the reagents or apparatus. Argon may be used as the carrier gas in gas chromatography and in electrospray ionization mass spectrometry ; it is the gas of choice for the plasma used in ICP spectroscopy .
English: Two welding helmets were tested using three welding process types, to determine whether they reduced fume concentrations inside the helmet relative to outside the helmet. Flux-cored and stick welding had higher in-helmet concentrations, and MIG welding had lower in-helmet concentrations, for both helmets tested.
The most common purge gases commercially available in large quantities are nitrogen and carbon dioxide. Other inert gases, e.g. argon or helium may be used. Nitrogen and carbon dioxide are unsuitable purge gases in some applications, as these gases may undergo chemical reaction with fine dusts of certain light metals.
The term inert gas is context-dependent because several of the inert gases, including nitrogen and carbon dioxide, can be made to react under certain conditions. [ 1 ] [ 2 ] Purified argon gas is the most commonly used inert gas due to its high natural abundance (78.3% N 2 , 1% Ar in air) [ 3 ] and low relative cost.
Oxygas welding station (keep cylinders and hoses away from the flame) Gas welding/cutting goggles and safety helmet. Oxyacetylene welding/cutting is generally considered not to be difficult, but there are a good number of subtle safety points that should be learned such as: More than 1/7 the capacity of the cylinder should not be used per hour.
These techniques prevent the compounds from reacting with components of air, usually water and oxygen; less commonly carbon dioxide and nitrogen. A common theme among these techniques is the use of a fine (10 0 –10 −3 Torr) or high (10 −3 –10 −6 Torr) vacuum to remove air, and the use of an inert gas: preferably argon, but often nitrogen.
Ads
related to: argon vs nitrogen welding helmet pros and cons youtube tv