Search results
Results from the WOW.Com Content Network
The tail rotor is powered by the helicopter's main power plant, and rotates at a speed proportional to that of the main rotor. In both piston and turbine powered helicopters, the main rotor and the tail rotor are mechanically connected through a freewheeling clutch system , which allows the rotors to keep turning in the event of an engine ...
Applying the pedal in a given direction changes the tail rotor blade pitch, increasing or reducing tail rotor thrust and making the nose yaw in the direction of the applied pedal [5] Later designs known as 'NOTAR' use an air stream to provide anti-torque control instead of a tail rotor. This air stream is generated in the fuselage by a small ...
The tail rotor is a smaller rotor mounted so that it rotates vertically or near-vertically at the end of the tail of a traditional single-rotor helicopter. The tail rotor's position and distance from the center of gravity allow it to develop thrust in a direction opposite that of the main rotor's rotation, thereby countering the torque effect ...
While further flight experiments were conducted using an even larger Fenestron upon an SA 330 Puma medium lift helicopter around the same time frame, it was concluded that there were practical limits to how large a helicopter such a configuration would be suited to, and production examples of the Puma retained a conventional tail rotor instead ...
Add this template to the bottom of pertinent articles using: {{Helicopters and rotorcraft}} See also US ...
Static Rollover is a rolling action when the helicopter blades are not in rotation. When the rotor blades stop, the helicopter has the same principles of any other object and will roll if the static rollover critical angle is exceeded. Each helicopter has its own critical angle; this is a byproduct of its center-of-gravity.
Autorotation is a state of flight in which the main rotor system of a helicopter or other rotary-wing aircraft turns by the action of air moving up through the rotor, as with an autogyro, rather than engine power driving the rotor.
Proper maintenance of the helicopter's damping system components can prevent ground resonance from taking hold. When it does occur, recovery is often possible if action is taken quickly. If sufficient rotor RPM exists, immediate takeoff can restore rotor balance by allowing the airframe to move and help dampen the oscillation freely. [1]