Search results
Results from the WOW.Com Content Network
Ethylene oxide treatment is the most common chemical sterilization method, used for approximately 70% of total sterilizations, and for over 50% of all disposable medical devices. [ 26 ] [ 27 ] Ethylene oxide treatment is generally carried out between 30 and 60 °C (86 and 140 °F) with relative humidity above 30% and a gas concentration between ...
Ethylene oxide is a colorless gas at 25 °C (77 °F) and is a mobile liquid at 0 °C (32 °F) – viscosity of liquid ethylene oxide at 0 °C is about 5.5 times lower than that of water. The gas has a characteristic sweet odor of ether, noticeable when its concentration in air exceeds 500 ppm. [ 26 ]
Sterilization can also be achieved using ethylene oxide (ETO) gas. This process was created in the 1950s by the US military [4] and is used on items that cannot withstand the high temperatures of steam sterilization. ETO sterilization takes far longer than steam sterilization and is hazardous to workers, so alternative methods were created in ...
The odor threshold for these gases is above the PELs and for ethylene oxide it is 500 ppm, approaching that of the IDLH. [1] Odor is thus inadequate as a monitoring technique. Continuous gas monitors are used as part of an overall safety program to provide a prompt alert to nearby workers in the event that there is a leak of the sterilant gas ...
In a meeting hosted by the EPA, representatives informed Memphians about ethylene oxide and what steps come next. Chemical linked to high cancer rates 40-times more toxic than previously thought ...
Anprolene is a registered trade name for ethylene oxide that belongs to Andersen Sterilizers.. Harold Willids Andersen invented Anprolene in 1967 and used plastic bags and small ampoules, hence, substantially less ethylene oxide (EtO) than traditional chamber type sterilizers which employ tanks of EtO.
Equipment used in aseptic processing of food and beverages must be sterilized before processing and remain sterile during processing. [1] When designing aseptic processing equipment there are six basic requirements to consider: the equipment must have the capability of being cleaned thoroughly, it must be able to be sterilized with steam, chemicals, or high-temperature water, sterilization ...
A medical sterilization company has agreed to settle nearly 80 lawsuits alleging people were exposed to a cancer-causing chemical emitted from its plant outside of Atlanta.