Search results
Results from the WOW.Com Content Network
There are typically five parts to a flash drive: USB plug – provides a physical interface to the host computer. Some USB flash drives use USB plug that does not protect the contacts, with the possibility of plugging it into the USB port in the wrong orientation, if the connector type is not symmetrical.
The USB mass storage device class (also known as USB MSC or UMS) is a set of computing communications protocols, specifically a USB Device Class, defined by the USB Implementers Forum that makes a USB device accessible to a host computing device and enables file transfers between the host and the USB device. To a host, the USB device acts as an ...
On the device side, a modified Micro-B plug (Micro-B SuperSpeed) is used to cater for the five additional pins required to achieve the USB 3.0 features (USB-C plug can also be used). The USB 3.0 Micro-B plug effectively consists of a standard USB 2.0 Micro-B cable plug, with an additional 5 pins plug "stacked" to the side of it.
A Chromecast stick plugged into the HDMI port of a TV. The cable attached to the other end is the USB power supply. In the mid-to-late 2010s, the dongle form factor was extended to digital media players with a small, stick-like form factor—such as Chromecast and Fire TV Stick—that are designed to plug directly into an HDMI port on a television or AV receiver (powered via Micro USB ...
Examples of removable media that are standalone plug-and-play devices that carry their own reader hardwares include: USB flash drives [5] Portable storage devices. Dedicated external solid-state drives (SSD) Enclosured mass storage drives, i.e. modified hard disk drives (HDD)/internal SSDs; Peripheral devices that have integrated data storage ...
USB 3.0 SuperSpeed and USB 2.0 High-Speed versions defined USB 3.0 SuperSpeed – host controller (xHCI) hardware support, no software overhead for out-of-order commands; USB 2.0 High-speed – enables command queuing in USB 2.0 drives; Streams were added to the USB 3.0 SuperSpeed protocol for supporting UAS out-of-order completions
Juice jacking is not possible if a device is charged via a trusted AC adapter or battery backup device, or if using a USB cable with only power wires. For USB cables with data wires, a USB data blocker (sometimes called a USB condom) [25] can be connected between device and charging port to disallow a data connection. [26]
To set up a live USB system for commodity PC hardware, the following steps must be taken: A USB flash drive needs to be connected to the system, and be detected by it; One or more partitions may need to be created on the USB flash drive; The "bootable" flag must be set on the primary partition on the USB flash drive