Search results
Results from the WOW.Com Content Network
Direct reduction processes can be divided roughly into two categories: gas-based and coal-based. In both cases, the objective of the process is to remove the oxygen contained in various forms of iron ore (sized ore, concentrates, pellets, mill scale, furnace dust, etc.) in order to convert the ore to metallic iron, without melting it (below 1,200 °C (2,190 °F)).
In the iron and steel industry, direct reduction is a set of processes for obtaining iron from iron ore, by reducing iron oxides without melting the metal. The resulting product is pre-reduced iron ore. Historically, direct reduction was used to obtain a mix of iron and slag called a bloom in a bloomery.
The reduced iron agglomerates into 3 to 8 mm metal nodules called Luppen. If the infusibility of the gangue is high, the temperature must be increased, up to 1,400 °C for a basic charge. [22] It is crucial to control the gangue's hot viscosity. [9] Among rotary drum direct reduction processes, it stands out for using high temperatures.
Direct-reduced iron can be produced from iron ore as it reacts with atomic hydrogen. Renewable hydrogen allows steelmaking without fossil fuels. Direct reduction occurs at 1,500 °F (820 °C). The iron is infused with carbon (from coal) in an electric arc furnace. Hydrogen electrolysis requires approximately 2600 kWh per ton of steel. Hydrogen ...
The HIsarna ironmaking process is a direct reduced iron process for iron making in which iron ore is processed almost directly into liquid iron ().The process combines two process units, the Cyclone Converter Furnace (CCF) for ore melting and pre-reduction and a Smelting Reduction Vessel (SRV) where the final reduction stage to liquid iron takes place.
Direct reduction is the fraction of iron oxide reduction that occurs in a blast furnace due to the presence of coke carbon, while the remainder - indirect reduction - consists mainly of carbon monoxide from coke combustion. It should also be noted that many non-ferrous oxides are reduced by this type of reaction in a blast furnace.
The Corex Process is a smelting reduction process created by Primetals Technologies as a more environmentally friendly alternative to the blast furnace. [1] Presently, the majority of steel production is through the blast furnace which has to rely on coking coal [2] and requires a sinter plant in order to prepare the iron ore for reduction. [3]
Bloomeries — where bar iron was produced from iron ore by direct reduction; Electrolytic smelting — Employs a chromium/iron anode that can survive a 2,850 °F (1,570 °C) to produce decarbonized iron and 2/3 of a ton of industrial-quality oxygen per ton of iron. A thin film of metal oxide forms on the anode in the intense heat.