Search results
Results from the WOW.Com Content Network
Variable Cylinder Management (VCM) is Honda's term for its variable displacement technology, which saves fuel by using the i-VTEC system to disable one bank of cylinders during specific driving conditions—for example, highway driving. The second version of VCM (VCM-2) took this a step further, allowing the engine to go from 6 cylinders, down ...
In Honda's 2006 Civic Hybrid, the 1.3-liter i-VTEC engine uses a 3-stage valve design, an advancement from the 2005 i-VTEC technology. Aside from weight and friction reduction, the engine operates on either low-speed timing, high-output timing or 4-cylinder idling when the VCM system is engaged, each yielding better engine output upon varying ...
A Honda K24A Engine with i-VTEC. VTEC (described as Variable Valve Timing & Lift Electronic Control, but stands for Valve Timing Electronically Controlled) is a system developed by Honda to improve the volumetric efficiency of a four-stroke internal combustion engine, resulting in higher performance at high RPM, and lower fuel consumption at low RPM.
It is fuel injected, has an aluminum-alloy cylinder block and cylinder head, is a SOHC 16-valve design (four valves per cylinder) and utilizes Honda's i-VTEC system. The R series engine has a compression ratio of 10.5:1, features a "drive by wire" throttle system which is computer controlled to reduce pumping losses and create a smooth torque ...
Honda has initiated its second major vehicle recall this month, this time for over 700,000 vehicles that may experience a fuel leak due to a cracked pump. Honda and the National Highway Traffic ...
Honda K24A4 2.4L DOHC i-VTEC Engine installed in 2003 Honda Accord. The Honda K-series engine is a line of four-cylinder four-stroke car engines introduced in 2001. The K-series engines are equipped with DOHC valvetrains and use roller rockers on the cylinder head to reduce friction.
The H22 debuted in the U.S. in 1993 as the H22A1 for use in the Honda Prelude VTEC.Since then, versions of the H22 would become the Prelude's [2] signature high-performance engine worldwide until the end of Prelude [2] production in 2001.
The J30A4 pushed output to 242 hp (180 kW) and 212 lb⋅ft (287 N⋅m) using a three-way VTEC system, a higher (10.0:1) compression ratio and a novel exhaust manifold cast as one piece with the cylinder head. It weighs nearly 20 lb (9.1 kg) less and is an inch shorter than J30A1.