Search results
Results from the WOW.Com Content Network
Tantalum capacitors in different styles: axial, radial and SMD-chip versions (size comparison with a match) 10 μF 30 VDC-rated tantalum capacitors, solid electrolyte epoxy-dipped style. A tantalum electrolytic capacitor is an electrolytic capacitor , a passive component of electronic circuits .
For example, a metric 2520 component is 2.5 mm by 2.0 mm which corresponds roughly to 0.10 inches by 0.08 inches (hence, imperial size is 1008). Exceptions occur for imperial in the two smallest rectangular passive sizes. The metric codes still represent the dimensions in mm, even though the imperial size codes are no longer aligned.
Aluminum, tantalum and niobium electrolytic capacitors are named after the material used as the anode and the construction of the cathode (electrolyte) Polymer capacitors are aluminum, tantalum or niobium electrolytic capacitors with conductive polymer as electrolyte; Supercapacitor is the family name for:
Tantalum electrolytic capacitors exploit the tendency of tantalum to form a protective oxide surface layer, using tantalum powder, pressed into a pellet shape, as one "plate" of the capacitor, the oxide as the dielectric, and an electrolytic solution or conductive solid as the other "plate".
Polymer tantalum electrolytic capacitors have ESR values that are approximately only 1/10 of the value of tantalum electrolytic capacitors with manganese dioxide electrolyte of the same size. By a multi-anode technique in which several anode blocks are connected in parallel in one case, the ESR value can be reduced again.
An electrolytic capacitor is a polarized capacitor whose anode or positive plate is made of a metal that forms an insulating oxide layer through anodization.This oxide layer acts as the dielectric of the capacitor.
For brevity, the notation omits to always specify the unit (ohm or farad) explicitly and instead relies on implicit knowledge raised from the usage of specific letters either only for resistors or for capacitors, [nb 1] the case used (uppercase letters are typically used for resistors, lowercase letters for capacitors), [nb 2] a part's appearance, and the context.
Unfortunately, the failure mechanism for a solid tantalum capacitor is a short which will result in a violent flaring up and smoking on a PCB capable of damaging other components in close proximity as well as completely destroying the capacitor. Fortunately, most solid tantalum capacitor failures will be immediate and very evident. Once in ...