Search results
Results from the WOW.Com Content Network
Pump pressure, which is also referred to as system pressure loss, is the sum total of all the pressure losses from the oil well surface equipment, the drill pipe, the drill collar, the drill bit, and annular friction losses around the drill collar and drill pipe. It measures the system pressure loss at the start of the circulating system and ...
0.052 * Mud weight (in ppg) * TVD (in feet) During circulation, the pressure applied is due to drilling mud weight and also due to the pressure applied by the mud pumps to circulate the drilling fluid. Pressure under circulating condition = Pressure under static condition + Pressure due to pumping at that point or pressure loss in the system
Drill pipe is most often considered premium class, which is 80% remaining body wall (RBW). After inspection determines that the RBW is below 80%, the pipe is considered to be Class 2 or "yellow band" pipe. Eventually the drill pipe will be graded as scrap and marked with a red band. Drill pipe is a portion of the overall drill string.
The head loss Δh (or h f) expresses the pressure loss due to friction in terms of the equivalent height of a column of the working fluid, so the pressure drop is =, where: Δh = The head loss due to pipe friction over the given length of pipe (SI units: m); [b]
For example, if the tool fails at 1,500 ft (460 m) while drilling with a triple rig (able to trip 3 joints of pipe, or about 90 ft (30 m) feet, at a time), then it would generally be faster to pull the tool out of the hole than it would be to rig up wireline and retrieve the tool, especially if the wireline unit must be transported to the rig.
A drill stem test (DST) is a procedure for isolating and testing the pressure, permeability and productive capacity of a geological formation during the drilling of a well. The test is an important measurement of pressure behaviour at the drill stem and is a valuable way of obtaining information on the formation fluid and establishing whether a ...
A prolonged, recurrent axial and rotational movement within casing would cause wear to the casing interior, with the probability of blowouts, production loss, and other hazardous and costly complications. The following conditions contribute to casing wear: Drill pipe weight; Mud and additives; RPM and ROP; Tool joint coating; Well path and dogleg
Use the following equation to calculate the free point from the rig floor: L sp = 735,294(X 2 − X 1)W dp ÷ F where L sp = depth of stuck point (ft), (X 2-X 1)= The stretch of the pipe from the reference point (in.), W dp = weight of drill pipe (lbs/ft), and F = the additional pull required (lbs.) It is important to note that the stretch test ...