Search results
Results from the WOW.Com Content Network
Examples include the 1923–1930 Cadillac Series 353 (powered by a 353 Cubic inch/5.8-litre engine), and the 1963–1968 BMW 1800 (a 1.8-litre engine) and Lexus LS 400 with a 3,968 cc engine. This was especially common in US muscle cars , like the Ford Mustang Boss 302 and 429, and later GT 5.0L, The Plymouth Roadrunner 383, and the Chevrolet ...
The first iteration of the W-series engine was the 1958 "Turbo-Thrust" 348-cubic-inch (5.7 L), originally intended for use in Chevrolet trucks but also introduced in the larger, heavier 1958 passenger car line. Bore and stroke was 4 + 1 ⁄ 8 in × 3 + 1 ⁄ 4 in (104.8 mm × 82.6 mm), resulting in a substantially oversquare design. This engine ...
4.342 in × 3 + 3 ⁄ 4 in (110.3 mm × 95.3 mm) bore x stroke, 8 cylinders, each having a bore of 4.342 inch and a stroke of 3.75 inch, results in a displacement of 444.21 cubic inches (7,279.34 cc); for the Pontiac OHC 427 Hemi refers to it as a "TOHC" and lists the bore at 4.257 inch—which, with a stroke of 3.75 inch, results in a ...
The engine was sold in different displacements depending on the model of car and the year and was constructed upon two distinct (possibly more) block castings. The engine block in the smaller displacement versions internally resembled the 1937-53 inline Chevrolet 216, 235 & 261" straight six (the combustion chamber design was quite different ...
The 477-cubic-inch (7.8 L) 477 was released late in the 1940 model year, replacing the 451. It was the largest in the GMC straight-6 line until it was replaced by the 503 in 1950. It shares the same 5 inches (130 mm) stroke as the 426 and 451, with a 4 + 1 ⁄ 2 inches (110 mm) bore. It produced a maximum 154 hp @ 2600 rpm and 385 lb•ft ...
After lengthening its stroke from 136 to 147 mm, its displacement was enlarged to 10.8 litres and the engine renamed M11, later ISM. The ISL 9 and current L9 engines are not related to the L10 engine, but instead based on the smaller C-series platform with the 135 mm stroke of the C8.3 enlarged to 144.5 mm, together with 4 valves per cylinder ...
Although it had had a larger displacement than its 261-cubic-inch (4.3 L) Stovebolt predecessor it was approximately 2 inches (51 mm) shorter and 1 ⁄ 4 inch (6.4 mm) lower. [54] Flywheel bolt pattern is the same as the six and V8, with 1 ⁄ 2 inch (12.7 mm) bolts for the flywheel if produced after the 1966 model year.
The Ford MEL is a big-block 90° V8 engine family produced in various configurations by the Ford Motor Company between 1958 and 1967 in displacements from 383–462 cubic inches (6.3–7.6 L), and used in Ford, Edsel, Mercury, and Lincoln vehicles.