Search results
Results from the WOW.Com Content Network
Quantities of natural gas are measured in standard cubic meters (cubic meter of gas at temperature 15 °C (59 °F) and pressure 101.325 kPa (14.6959 psi)) or standard cubic feet (cubic foot of gas at temperature 60.0 °F and pressure 14.73 psi (101.6 kPa)), 1 standard cubic meter = 35.301 standard cubic feet.
The heating value depends on the source of gas that is used and the process that is used to liquefy the gas. The range of heating value can span ±10 to 15 percent. A typical value of the higher heating value of LNG is approximately 50 MJ/kg or 21,500 BTU/lb. [2] A typical value of the lower heating value of LNG is 45 MJ/kg or 19,350 BTU/lb.
Glass Density Calculation – Calculation of the density of glass at room temperature and of glass melts at 1000 – 1400°C; List of Elements of the Periodic Table – Sorted by Density; Calculation of saturated liquid densities for some components; Field density test Archived December 15, 2010, at the Wayback Machine; Water – Density and ...
The density of propane gas at 25 °C (77 °F) is 1.808 kg/m 3, about 1.5× the density of air at the same temperature. The density of liquid propane at 25 °C (77 °F) is 0.493 g/cm 3, which is equivalent to 4.11 pounds per U.S. liquid gallon or 493 g/L. Propane expands at 1.5% per 10 °F. Thus, liquid propane has a density of approximately 4.2 ...
The density of butane is highly dependent on temperature and pressure in the reservoir. [19] For example, the density of liquid butane is 571.8±1 kg/m 3 (for pressures up to 2 MPa and temperature 27±0.2 °C), while the density of liquid butane is 625.5±0.7 kg/m 3 (for pressures up to 2 MPa and temperature −13±0.2 °C).
A United States Navy Aviation boatswain's mate tests the specific gravity of JP-5 fuel. Relative density, also called specific gravity, [1] [2] is a dimensionless quantity defined as the ratio of the density (mass of a unit volume) of a substance to the density of a given reference material.
After methane, ethane is the second-largest component of natural gas. Natural gas from different gas fields varies in ethane content from less than 1% to more than 6% by volume. Prior to the 1960s, ethane and larger molecules were typically not separated from the methane component of natural gas, but simply burnt along with the methane as a fuel.
For a substance X with a specific volume of 0.657 cm 3 /g and a substance Y with a specific volume 0.374 cm 3 /g, the density of each substance can be found by taking the inverse of the specific volume; therefore, substance X has a density of 1.522 g/cm 3 and substance Y has a density of 2.673 g/cm 3. With this information, the specific ...