Search results
Results from the WOW.Com Content Network
Outboard: attached outside the ship. [20] Port: the left side of the ship, when facing forward (opposite of "starboard"). [1] Starboard: the right side of the ship, when facing forward (opposite of "port"). [1] Stern: the rear of a ship (opposite of "bow"). [1] Topside: the top portion of the outer surface of a ship on each side above the ...
1. A position half way along the length of a ship or boat. [13] 2. A position half way between the port and starboard sides of a ship or boat, as in "helm amidships", when the rudder is in line with the keel. [13] ammunition ship A naval auxiliary ship specifically configured to carry ammunition, usually for combatant ships and aircraft.
Responsibility for the goods is with the seller until the goods are loaded on board the ship. Once the cargo is on board, the buyer assumes the risk. Ship loading at a wharf. The use of "FOB" originated in the days of sailing ships. When the ICC first wrote their guidelines for the use of the term in 1936, [7] the ship's rail was still relevant ...
The yard exists to allow square sails to be set to drive the ship. The top edge of the sail is 'bent on' (attached) to the yard semi-permanently. Clewlines and buntlines are led along the yard and from there to the mast and down to the deck. These allow the bottom of the sail to be hoisted up to the yard, so the sail is effectively folded in two.
Ships with cranes or other cargo handling equipment on-board are also termed geared vessels. As container ships usually have no on-board cranes or other mechanism to load or unload their cargo, they are therefore dependent on dockside container cranes to load and unload. However lift-on/lift-off vessels can load and unload their own cargo ...
Either of the braces attached to the yard of the mainsail (the largest and lowest sail on the mainmast) on a square-rigged vessel. mainmast. Also simply main. 1. The tallest mast on a ship [1] with more than one mast, especially the tallest mast on a full-rigged ship. 2. On a ship with more than one mast, the second mast from the bow. mainmast head
On container ships the position of containers are identified by a bay-row-tier coordinate system. The bays illustrate the cross sections of the ship and are numbered from bow to stern. The rows run the length of the ship and are numbered from the middle of the ship outwards, even numbers on the port side and odd numbers on the starboard side ...
A "clean bill of lading" (aka "on-board bill of lading") is used when there is full compliance with no discrepancies between the description filed by the shipper and the actual goods shipped. A clean bill of lading indicates that the goods have been properly loaded onboard the carrier's ship in accordance with the contract.