Search results
Results from the WOW.Com Content Network
In broadcast television systems, VF bandwidth, video bandwidth or more formally video frequency bandwidth is the range of frequencies between 0 and the highest frequency used to transmit a live television image.
Here t sweep is the sweep time, k is a dimensionless proportionality constant, f 2 − f 1 is the frequency range of the sweep, RBW is the resolution bandwidth, and VBW is the video bandwidth. [ 8 ] Detector
OC-12 is a network line with transmission speeds of up to 622.08 Mbit/s (payload: 601.344 Mbit/s; overhead: 20.736 Mbit/s).. OC-12 lines were commonly used by ISPs as wide area network (WAN) connections, or connecting xDSL customers to a larger internal network [3]
When analog video is converted to digital video, a different sampling process occurs, this time at the pixel frequency, corresponding to a spatial sampling rate along scan lines. A common pixel sampling rate is: 13.5 MHz – CCIR 601, D1 video; Spatial sampling in the other direction is determined by the spacing of scan lines in the raster. The ...
The 3 dB bandwidth of an electronic filter or communication channel is the part of the system's frequency response that lies within 3 dB of the response at its peak, which, in the passband filter case, is typically at or near its center frequency, and in the low-pass filter is at or near its cutoff frequency. If the maximum gain is 0 dB, the 3 ...
Video modulation is a strategy of transmitting video signal in the field of radio modulation and television technology. This strategy enables the video signal to be transmitted more efficiently through long distances. In general, video modulation means that a higher frequency carrier wave is modified according to the original video signal.
The Apollo Moon missions (late 1960s, early 1970s) used slow-scan television (SSTV) as opposed to normal bandwidth television; this was mostly done to save battery power (and transmission bandwidth, since the SSTV video from the Apollo missions was multiplexed with all other voice and telemetry communications from the spacecraft). The camera ...
In double-conversion superheterodyne receivers, a first intermediate frequency of 10.7 MHz is often used, followed by a second intermediate frequency of 470 kHz (or 700 kHz with DYNAS [15]). There are triple conversion designs used in police scanner receivers, high-end communications receivers, and many point-to-point microwave systems.