Search results
Results from the WOW.Com Content Network
A 1964 Rambler American with a 195.6 OHV engine. American Motors' first straight-six engine was the 196 cubic inch (195.6 cu in (3.2 L)) six produced from 1952 through 1965, initially as a flathead (L-head) side-valve, and later an overhead valve (OHV) version.
The 361-cubic-inch (5.9 L) 361 was released in 1939 alongside the 426 and 451. The 361 was discontinued in 1949 and replaced by the 360 "Group 2" engine. The 360 and 361 shared the exact same 4 + 1 ⁄ 8 inches (100 mm) bore and 4 + 1 ⁄ 2 inches (110 mm) stroke, but the 361 used the larger "Group 3" block. It produced a maximum 136 hp @ 3000 ...
Therefore, gas volume may alternatively be expressed excluding the humidity content: V d (volume dry). This fraction more accurately follows the ideal gas law. On the contrary, V s (volume saturated) is the volume a gas mixture would have if humidity was added to it until saturation (or 100% relative humidity).
GMC's own V8 was the 637-cubic-inch (10.4 L) unit, which was essentially a 478 V6 with two cylinders added. It shared the 5.125 in × 3.86 in (130.2 mm × 98.0 mm) bore and stroke and used a single camshaft. It was manufactured in gasoline and diesel versions, and was the largest-displacement production gasoline V8 ever made for highway trucks.
All Modular V8s, except for the 5.0 L Coyote and 5.2 L Voodoo, utilize the same firing order as the Ford 5.0 L HO and 351 CID V8s (1-3-7-2-6-5-4-8). The 4.6 L engines have been assembled at Romeo Engine Plant in Michigan, and at Windsor Engine Plant and Essex Engine Plant , both located in Windsor, Ontario .
The 144 cu in (2.4 L) inline-six engine was first introduced in the 1960 Ford Falcon. The 144 was made from 1960 through 1964 and averaged 90 hp (67 kW) during the production run. While not known for being powerful or a stout engine, it proved to be economical and could get fairly good gas mileage for the time, up to 30 mpg ‑US (8 L/100 km ...
Although it had had a larger displacement than its 261-cubic-inch (4.3 L) Stovebolt predecessor it was approximately 2 inches (51 mm) shorter and 1 ⁄ 4 inch (6.4 mm) lower. [54] Flywheel bolt pattern is the same as the six and V8, with 1 ⁄ 2 inch (12.7 mm) bolts for the flywheel if produced after the 1966 model year.
A unique to Mexico 282 cu in (4.6 L) straight-six engine was standard. It was designed to cope with low octane fuel and high altitudes. This engine featured dished pistons with a 3.909-inch (99.3 mm) bore and 3.894-inch (98.9 mm) stroke, as well as a unique head and exhaust porting design.