enow.com Web Search

Search results

1. Results from the WOW.Com Content Network

2. Valve stem - Wikipedia

   en.wikipedia.org/wiki/Valve_stem

   A valve stem is a self-contained valve that opens to admit gas to a chamber (such as air to inflate a tire), [1] and is then automatically closed and kept sealed by the pressure in the chamber, or a spring, [2] [3] or both, to prevent the gas from escaping.

3. Poppet valve - Wikipedia

   en.wikipedia.org/wiki/Poppet_valve

   The valve stem D moves up to open the valve discs C. James Watt was using poppet valves to control the flow of steam into the cylinders of his beam engines in the 1770s. A sectional illustration of Watt's beam engine of 1774 using the device is found in Thurston 1878:98, [ 13 ] and Lardner (1840) provides an illustrated description of Watt's ...

4. List of valves - Wikipedia

   en.wikipedia.org/wiki/List_of_valves

   The sheet has a solid end and a flow-through end; sliding it from one position to the other opens or stops the flow. Also called sliding blind valve; Outflow valve: regulates flow and pressure, part of cabin pressurization; Pilot valve: regulates flow or pressure to other valves; Petcock, a small shut-off valve

5. Valve - Wikipedia

   en.wikipedia.org/wiki/Valve

   The motion transmitted by the stem may be a linear force, a rotational torque, or some combination of these (Angle valve using torque reactor pin and Hub Assembly). The valve and stem can be threaded such that the stem can be screwed into or out of the valve by turning it in one direction or the other, thus moving the disc back or forth inside ...

6. Schrader valve - Wikipedia

   en.wikipedia.org/wiki/Schrader_valve

   Schrader valve components (from left to right) the valve core closed (top) and open (bottom), the order of assembly, end view of stem without core and with core (top) and stem with the dust cap on (bottom). The core has a short outer thread which is screwed into the inner thread of the stem. The visible outer thread of the stem holds the dust cap.

7. Control valve - Wikipedia

   en.wikipedia.org/wiki/Control_valve

   Control valve: Controls flow parameters proportional to an input signal received from the central control system. Examples: Globe valve, angle valve, ball valve; Shut-off / On-off valve: These valves are either completely open or closed. Examples: Gate valve, ball valve, globe valve, angle valve, pinch valve, diaphragm valve

8. Globe valve - Wikipedia

   en.wikipedia.org/wiki/Globe_valve

   With a smooth stem the ends are threaded to allow connection to the plug and the actuator. The stem must not only withstand a large amount of compression force during valve closure, but also have high tensile strength during valve opening. In addition, the stem must be very straight, or have low run-out, in order to ensure good valve closure ...

9. Valve actuator - Wikipedia

   en.wikipedia.org/wiki/Valve_actuator

   The blue valve body is visible in-line with the pipe. The valve actuator opens or closes the butterfly disc of the valve based on electrical signals sent to the actuator. Another valve actuator is visible in the background, with windows to indicate the valve position. A valve actuator is the mechanism for opening and closing a valve. Manually ...