Search results
Results from the WOW.Com Content Network
Loopers serve to create thread loops that pass from the needle thread to the edges of the fabric so that the edges of the fabric are contained within the seam. Overlock sewing machines usually run at high speeds, from 1000 to 9000 rpm, and most are used in industry for edging, hemming and seaming a variety of fabrics and products.
This motion is known as feed, and sewing machines have almost as many ways of feeding material as they do of forming stitches. For general categories, there are: drop feed, needle feed, walking foot, puller, and manual. Often, multiple types of feed are used on the same machine.
where is the tap drill size, is the major diameter of the tap (e.g., 10 mm for a M10×1.5 tap), and pitch is the pitch of the thread (1.5 mm in the case of a standard M10 tap) and so the correct drill size is 8.5 mm. This works for both fine and coarse pitches, and also produces an approximate 75% thread.
The Merrow Sewing Machine Company, best known for inventing the overlock sewing machine, is a manufacturer of sewing machines.After the explosion of his gunpowder mill in 1837, in 1838 J.M. Merrow built a knitting mill on the same site.
Designed with an extra strong shaft and with a tapered point to penetrate multiple layers of woven fabrics without breaking and without shredding either the thread or the fabric being sewn. Serger/ Industrial: These needles can only be used in serger and overlocking machines. Microtex/ Sharps: More slender and sharper than the universal needle.
Hem detail with inscriptions, Saint-John in Crucifixion, Ferrara, by Vicino da Ferrara (1469–70). A hem in sewing is a garment finishing method, where the edge of a piece of cloth is folded and sewn to prevent unravelling of the fabric and to adjust the length of the piece in garments, such as at the end of the sleeve or the bottom of the garment.
Many thread sizes have several possible tap drills, because they yield threads of varying thread depth between 50% and 100%. Usually thread depths of 60% to 75% are desired. People frequently use a chart such as this to determine the proper tap drill for a certain thread size or the proper tap for an existing hole.
The distance between the needles determines the distance between the lines of straight stitches. Home machines generally offer a narrow setting of 2.5 or 3.5 mm, and a wide setting of 5 mm. Some of the newest home machines permit a 4-thread coverstitch which results in three lines of parallel straight stitches. [1]: 46