Search results
Results from the WOW.Com Content Network
Pressure in cylinder pattern in dependence on ignition timing: (a) - misfire, (b) too soon, (c) optimal, (d) too late. In a spark ignition internal combustion engine, ignition timing is the timing, relative to the current piston position and crankshaft angle, of the release of a spark in the combustion chamber near the end of the compression stroke.
It has four valves per cylinder, utilizes dual-overhead cams design, and features variable valve timing on the exhaust cam, a first for GM inline engines. When introduced, this engine's power was 270 hp (201 kW) at 6,000 rpm and torque was 275 lb⋅ft (373 N⋅m) at 3,600 rpm. 2003 saw a slight bump in power to 275 hp (205 kW), while torque was ...
The engine has a displacement of 2.0 L; 121.9 cu in (1,998 cc) with a bore and a stroke of 3.38 in × 3.38 in (86 mm × 86 mm). [2] The compression ratio of the engine is 10.5:1. [2] The 2.0 L engine was offered by Dodge in the Dodge Caliber. Outside North America, the 2.0 was the base engine for the 2007 Chrysler Sebring and 2008 Dodge Avenger.
In 1994, all 2.2-liter engines were updated to sequential multi-port fuel injection and power increased to 120 hp (89 kW), with torque increasing to 140 lb⋅ft (190 N⋅m). The MPFI and SFI versions produced enough power to allow the 2.2 to replace the old Pontiac Iron Duke engine as the 4-cylinder offering in the S/T trucks and A-body cars.
The Chevrolet 2300 is a 2.3-liter straight-four engine produced by the Chevrolet division of General Motors for the 1971 to 1977 model years of the Chevrolet Vega and Chevrolet Monza. This engine was also offered in the 1973–74 Pontiac Astre (Canada only), the 1975–77 Pontiac Astre (United States and Canada), the Pontiac Sunbird for 1976 ...
The first version of this engine family was a normally aspirated 2.2 L (134 cu in) unit. Developed under the leadership of Chief Engineer – Engine Design and Development Willem Weertman and head of performance tuning Charles "Pete" Hagenbuch, who had worked on most of Chrysler's V-8 engines and the Chrysler Slant-6 engine, [1] it was introduced in the 1981 Dodge Aries, Dodge Omni, Plymouth ...
The engine is a 2.0 litres (1,950 cc) turbo-diesel cast aluminum block, inline four-cylinder with balancing shafts. [3] It has a single turbo and its cylinder walls are lined with slippery Nanoslide, an iron-carbon coating that cuts friction. In the 200-configuration it produces 110 kW (150 PS; 148 hp) at 4,500 rpm with peak torque of 320 N⋅m ...
This removes 44 pounds (20 kg) from the existing 1.4-liter turbo in the Cruze and makes it 8 pounds (4 kg) lighter than the 1.4-liter VW turbo. GM says this engine weighs 216 pounds (98 kg), ready for installation. [2] The engines debuted in the 2014 Opel Adam [3] and are produced in Szentgotthárd, Hungary, [4] and GM's Flint Engine plant. [5]