Search results
Results from the WOW.Com Content Network
IPv6 - FF02:0:0:0:0:0:1:3 (this notation can be abbreviated as FF02::1:3), MAC address 33-33-00-01-00-03 The responders also listen on TCP port 5355 on the unicast address that the host uses to respond to queries.
Port security may be configured statically with a list, dynamically based on the first given number of addresses detected, or a combination of these two methods. When port security is configured, the default settings are to allow only one MAC address per port, and to shut down the port if the allowed number of addresses is exceeded. [2]
IPv6 multicast: [41] The low 32 bits an Ethernet address for IPv6 multicast traffic are the low 32 bits of the multicast IPv6 address used. [40]: §2.3.1 For example, IPv6 multicast traffic using the address ff02::d uses the MAC address 33-33-00-00-00-0D, and traffic to ff05::1:3 goes to the MAC address 33-33-00-01-00-03. 01-0C-CD IEC
The Internet Engineering Task Force (IETF) has reserved the IPv4 address block 169.254.0.0 / 16 (169.254.0.0 – 169.254.255.255) for link-local addressing. [1] The entire range may be used for this purpose, except for the first 256 and last 256 addresses (169.254.0.0 / 24 and 169.254.255.0 / 24), which are reserved for future use and must not be selected by a host using this dynamic ...
IPv6 IPv6 Encapsulation (6to4 and 6in4) RFC 2473: 0x2A 42 SDRP Source Demand Routing Protocol: RFC 1940: 0x2B 43 IPv6-Route Routing Header for IPv6: RFC 8200: 0x2C 44 IPv6-Frag Fragment Header for IPv6: RFC 8200: 0x2D 45 IDRP Inter-Domain Routing Protocol: 0x2E 46 RSVP Resource Reservation Protocol: RFC 2205: 0x2F 47 GRE Generic Routing ...
In effect, MAP is an (almost) stateless alternative to Carrier-grade NAT and DS-Lite that pushes the IPv4 IP address/port translation function (and therefore the maintenance of NAT state) entirely into the existing customer premises equipment IPv4 NAT implementation, thus avoiding the NAT444 and statefulness problems of carrier-grade NAT.
The Neighbor Discovery Protocol (NDP), or simply Neighbor Discovery (ND), is a protocol of the Internet protocol suite used with Internet Protocol Version 6 (IPv6). [1]: §1 It operates at the internet layer of the Internet model, [2] and is responsible for gathering various information required for network communication, including the configuration of local connections and the domain name ...
In practice, when a Teredo client wants to contact a native IPv6 node, it must locate the corresponding Teredo relay, i.e., to which public IPv4 and UDP port number to send encapsulated IPv6 packets. To do that, the client crafts an ICMPv6 Echo Request ( ping ) toward the IPv6 node, and sends it through its configured Teredo server.