Search results
Results from the WOW.Com Content Network
In effect, the formula reduces the legal weight limit for shorter trucks with fewer axles (see table below). For example, a 25-foot (7.6 m) three-axle dump truck would have a gross weight limit of 54,500 pounds (24,700 kg), instead of 80,000 pounds (36,000 kg), which is the standard weight limit for 63-foot (19.2 m) five-axle tractor-trailer. [1]
The standard rail weight for British railways is now 113 lb/yd (56.1 kg/m). Before the 1990s, most diesel locomotives were built to a maximum axle load of 19 long tons (19.3 tonnes; 21.3 short tons) so the maximum locomotive weight was 76 long tons (77.2 tonnes; 85.1 short tons) for a four-axle locomotive and 114 long tons (115.8 tonnes; 127.7 short tons) for a six-axle one.
Overlength limits vary depending on the type and the configuration of vehicle, but the overall maximum forward distance (i.e. the length from the front of the vehicle to the centre axis of the rear axle set) is 9.5 m (31 ft 2 in), the overall maximum single vehicle length is 12.6 m (41 ft 4 in) (some buses can be longer), and the overall ...
The first state to implement a weight law was Maine, which set a limit of 18,000 pounds (9 tons; 8,200 kg) in 1918. Two types of loads may result in overweight trucks: divisible and non-divisible. A divisible load is a load which can be easily divided into smaller parts, such as products that are shipped on pallets, automobiles or grains.
Signs including Stop, Yield, No Turns, No Trucks, No Parking, No Stopping, Minimum Speed, Right Turn Only, Do Not Enter, Weight Limit, and Speed Limit are considered regulatory signs. Some have special shapes, such as the octagon for the Stop sign, the triangle for the Yield sign, and the crossbuck for railroad crossings.
Though school hours in California might range from about 7 a.m. to 4 p.m., Olsen said drivers should still be cautious when passing by a school zone because after-school programs can last until 6 p.m.
Route availability for a vehicle (locomotive or wagon) is generally based upon its axle loading. That is, how much of the laden weight of the vehicle is distributed on each axle. The more weight on each axle, the higher the RA number, and the more restricted the vehicle is. For wagons it is normal to have different RAs when running empty and full.
The axle is lowered to increase the weight capacity, or to distribute the weight of the cargo over more wheels, for example, to cross a weight-restricted bridge. When not needed, the axle is lifted off the ground to save wear on the tires and axle, and to increase traction in the remaining wheels, and to decrease fuel consumption.