Ads
related to: magnetic socket 3 8 13mm cable connector
Search results
Results from the WOW.Com Content Network
A MagSafe connector is held in place magnetically so that if it is tugged (for example, by someone tripping over the cable), it will be pulled out of the port without damaging the connector or the port, and without pulling the computer off its surface. [1] A thinner and wider version, called MagSafe 2, was introduced in 2012.
Plugs according to T11 and T21 are between 13 mm and 14.5 mm wide, those according to T13 and T23 between 14.5 mm and 20 mm wide. Connector according to T11 and T13 between 35 mm and 36 mm long. The respective angles are 45 degrees. Three-phase plugs have a dimension of 35.4 (± 0.7) × 30 (± 0.7) mm. Pin length of the connector The pins are ...
PS/2 female socket pin numbering: note that it is a mirror of the male connector. The mini-DIN connectors are a family of multi-pin electrical connectors used in a variety of applications. Mini-DIN 9.5 millimetres (3 ⁄ 8 in) is similar to the larger, older 13.2 mm diameter DIN connector.
Five-pin male 180° DIN connector from a 1988 Schneider MF2 keyboard by Cherry. The DIN connector is an electrical connector that was standardized by the Deutsches Institut für Normung (DIN), the German Institute for Standards, in the mid 1950s, initially with 3 pins for mono, but when stereo connections and gear appeared in late 1950s (1959 or so), versions with 5 pins or more were launched.
Cable glands are mostly used for cables with diameters between 1 mm and 75 mm. [3] Cable glands are commonly defined as mechanical cable entry devices. [ 4 ] They are used throughout a number of industries in conjunction with cable and wiring used in electrical instrumentation and automation systems.
SMA connectors must not be confused with the standard household 75-ohm type F coax connector (diameters: male 7 ⁄ 16 inch (11 mm) circular or hex; female 3 ⁄ 8 inch (9.5 mm) external threads), as there is only about a 2 mm difference overall in the specifications. Type F cannot be mated with SMA connectors without the use of an adapter.
A double DIN 1.6/5.6 bulkhead jack connector, crimp type, for 75 Ω coaxial cable A Type N connector (male), right-angled solder-type for semi-rigid coaxial cable with a diameter of 0.141-inch. 4.1-9.5 connector, standardized as DIN 47231 (in 1974) and IEC 60169-11 (in 1977) 4.3-10 connector, formerly known as DIN 4.3/10, now standardized as ...
They are commonly referred to by the inner diameter of the outer conductor in fractional inches. Sizes covered under these two standards range from 3/8 to 6 1/8 inch outside diameter (OD) for 50 Ω and 3/8 to 3 1/8 inch OD for 75 Ω.
Ads
related to: magnetic socket 3 8 13mm cable connector