Search results
Results from the WOW.Com Content Network
Ventilation should be considered for its relationship to "venting" for appliances and combustion equipment such as water heaters, furnaces, boilers, and wood stoves. Most importantly, building ventilation design must be careful to avoid the backdraft of combustion products from "naturally vented" appliances into the occupied space.
[2] [3] It is the design of this mechanism that determines the accuracy of maintaining the set flow rate, noise level, minimum regulator resistance, flow range and other parameters. [ 4 ] [ 5 ] There are different designs of the self-balancing mechanism that largely determine the technical characteristics of CAV regulators:
Diagram of natural draft gas furnace, early 20th century. The first category of furnaces is natural draft, atmospheric burner furnaces. These furnaces consisted of cast-iron or riveted-steel heat exchangers built within an outer shell of brick, masonry, or steel. The heat exchangers were vented through brick or masonry chimneys.
The flue system is composed of two flues, the inner flue and the outer flue. The outer flue draws air into the bottom of the sealed firebox to allow for combustion. The inner flue draws hot exhaust gasses from the top of the sealed firebox and vents them directly to the outside of the structure through either an adjacent wall or roof.
A floor register. A register is a grille with moving parts, capable of being opened and closed and the air flow directed, which is part of a building's heating, ventilation, and air conditioning (HVAC) system.
A 19th-century example of a wood-burning stove. A wood-burning stove (or wood burner or log burner in the UK) is a heating or cooking appliance capable of burning wood fuel, often called solid fuel, and wood-derived biomass fuel, such as sawdust bricks.
Rocket mass heaters are developed from rocket stoves, a type of wood-burning stove, and masonry heaters. A primary design of a rocket mass heater consists of an insulated combustion chamber where fuel is burned with high efficiency at high temperature, and a large thermal mass in contact with the exhaust gases , which absorbs most of the ...
In a modern high-rise building with a well-sealed envelope, the stack effect can create significant pressure differences that must be given design consideration and may need to be addressed with mechanical ventilation. Stairwells, shafts, elevators, and the like, tend to contribute to the stack effect, while interior partitions, floors, and ...