enow.com Web Search

Search results

1. Results from the WOW.Com Content Network

2. Wheel sizing - Wikipedia

   en.wikipedia.org/wiki/Wheel_sizing

   Off-roading tires may use a different measurement scheme: Tread width × Outside diameter, followed by wheel size (all in inches) – for example 31×10.50R15 (787 mm × 267 mm R380 in metric designation). The size of the wheel, however, is denoted as 8.5 in × 20.0 in (220 mm × 510 mm).

3. ISO 5775 - Wikipedia

   en.wikipedia.org/wiki/ISO_5775

   The overall diameter of the tire is then the rim diameter plus twice the tire's section height. The ISO 5775-1 standard also defines procedures for measuring tires and for calculating from the marking the maximum dimensions of a tire, which are needed by designers to determine clearance distances to other bicycle components.

4. Tire code - Wikipedia

   en.wikipedia.org/wiki/Tire_code

   As an example, if a tire size has two sets of numbers (6-12, 5.00-15, 11.2-24), then the first number (5.00-15) is the approximate width in inches, and the second number (5.00-15) is the rim diameter in inches. If a tire size has three sets of numbers (15x6.00-6, 26x12.00-12, 31x15.50-15), then the first number (26x12.00-12) is the approximate ...

5. Tire uniformity - Wikipedia

   en.wikipedia.org/wiki/Tire_uniformity

   The tire is first centered, and the bead areas are lubricated to assure a smooth fitment to the measurement rims. The tire is indexed into the test station and placed on the lower chuck. The upper chuck lowers to make contact with the upper bead. The tire is inflated to the set point pressure. The load wheel advances to contact the tire and ...

6. European Tyre and Rim Technical Organisation - Wikipedia

   en.wikipedia.org/wiki/European_Tyre_and_Rim...

   ETRTO sizes apply to rims and tyres for vehicles of all types, including bicycles. The great advantage of ETRTO sizing is that it is unambiguous; previously, nominal dimensions were used which were interpreted in different ways by different countries and manufacturers - a problem for the end user.

7. Plus sizing - Wikipedia

   en.wikipedia.org/wiki/Plus_sizing

   Plus sizing is the practice of replacing an automotive wheel with one of a larger diameter fitted with a new tire of lower aspect ratio so that the new tire has close to the same diameter and circumference as the original tire to minimize any changes in speedometer accuracy, torque and traction control, while reducing sidewall flex and (generally) increasing cornering ability.