Search results
Results from the WOW.Com Content Network
The GE Passport is a high bypass ratio turbofan. The engine is a twin-spool, axial-flow turbofan with a high bypass ratio of 5.6:1 and an overall pressure ratio of 45:1. The front fan is attached to the three-stage low-pressure compressor; the 23:1 pressure ratio 10-stage high-pressure compressor includes five blisk stages for weight reduction.
The CFE CFE738 is a small turbofan engine aimed at the business/commuter jet market manufactured by the CFE Company, and is used on the Dassault Falcon 2000. Design and development [ edit ]
Data from FAA General characteristics Type: Twin spool Turbofan Length: 105.8 in (269 cm) (flange to flange) / 130.44 in (331.3 cm) (fan spinner face to aft tail cone) Diameter: 50 in (130 cm) fan case Dry weight: 3,135.7 pounds (1,422.3 kg) (dry) Components Compressor: 24-blade, single-piece Single-stage fan, 2-stage LP and 8-stage HP compressor Turbine: 2 stage HP and 5 stage LP turbine LP ...
Average fuel consumption is about 950 lb. per hour for a 7,765 lbf engine on a G280, to be compared to 875 lb. per hour for a 4,420 lbf TFE731 on a G150. [3] More than 3.5 million flight hours have been logged till October 2017, and the 2,000th engine should be delivered in 2018. [2] Honeywell maintenance program is $447 for two engines per ...
The engines involved in the July and September incidents had 154 and 230 cycles, respectively, while the October failure occurred to an engine with 1,654 cycles since new but within 300 cycles after an electronic engine-control update. Pratt & Whitney recommends inspections on engines with up to 300 cycles after the update.
The -5 model was certified in 1982, and a decade later, an engine utilizing the TFE731-5 power section and a TFE731-3 fan was built and designated the TFE731-4, intended to power the Cessna Citation VII aircraft. [4] The most recent version is the TFE731-50, based on the -60 used on the Falcon 900DX, which underwent its flight test program in ...
A 2-stage fan replaced the first 3 stages of the 9-stage JT3C LP compressor. On the LP turbine, the second stage was enlarged and a third stage added. Unlike GE with the CJ805-23, Pratt & Whitney had not undertaken any transonic fan research prior to designing the JT3D, so they were unable to incorporate a single stage unit into the ...
The engine final assembly line is located at MTU Aero Engines at their location in Hanover, Germany. LAN Airlines confirmed an order for 15 Airbus A318 aircraft, for a total of 34 engines (30 installed and 4 spares) powered by PW-6000 engines on 15 August 2005. In addition, LAN signed with Pratt and Whitney to power up to 25 option aircraft.