Search results
Results from the WOW.Com Content Network
Ethernet over USB is the use of a USB link as a part of an Ethernet network, resulting in an Ethernet connection over USB (instead of e.g. PCI or PCIe).. USB over Ethernet (also called USB over Network or USB over IP) is a system to share USB-based devices over Ethernet, Wi-Fi, or the Internet, allowing access to devices over a network.
Most versions of Android include RNDIS USB functionality. For example, Samsung smartphones have the capability and use RNDIS over USB to operate as a virtual Ethernet card that will connect the host PC to the mobile or Wi-Fi network in use by the phone, effectively working as a mobile broadband modem or a wireless card, for mobile hotspot ...
The idle line state is when the device is connected to the host with a pull-up on either D+ (for full speed USB 1.x) or D− (for low speed USB 1.x), with transmitter output on both host and device is set to high impedance (hi-Z) (disconnected output).
Device interfaces where one bus transfers data via another will be limited to the throughput of the slowest interface, at best. For instance, SATA revision 3.0 ( 6 Gbit/s ) controllers on one PCI Express 2.0 ( 5 Gbit/s ) channel will be limited to the 5 Gbit/s rate and have to employ more channels to get around this problem.
To allow for voltage drops, the voltage at the host port, hub port, and device are specified to be at least 4.75 V, 4.4 V, and 4.35 V respectively by USB 2.0 for low-power devices, [a] but must be at least 4.75 V at all locations for high-power [b] devices (however, high-power devices are required to operate as a low-powered device so that they ...
W-USB interacts with wired USB via wire adapters. W-USB can form true USB systems, formed by a host, devices and interconnection support. It implements the USB hub–spoke model, in which up to 127 wireless devices can form point-to-point links (spokes) with the host (the hub). The host controller is unique in the system and is usually embedded ...
Class definitions for Communication Devices 1.2 (.zip file format, size 3.43 MB) Class definitions for Communication Devices 1.1; App Note, Migrating from RS-232 to USB Bridge Specification. Explains the use of USB CDC (Communications Device Class) ACM (Abstract Control Model) to emulate serial ports over USB.
An invalid cable by USB standards. USB On-The-Go (USB OTG or just OTG) is a specification first used in late 2001 that allows USB devices, such as tablets or smartphones, to also act as a host, allowing other USB devices, such as USB flash drives, digital cameras, mouse or keyboards, to be attached to them. Use of USB OTG allows devices to ...