Search results
Results from the WOW.Com Content Network
WXGA: Widescreen Extended Graphics Array A wide version of the XGA format. This display aspect ratio was common in widescreen notebook computers until ca. 2010. 1366×768 (1,049k) [2], 1360×768 (1,044k), 1280×800 (1,024k) 1366 768 1,049,088 ≈16:9 (1366×768 and 1360x768), 16:10 (1280x800) 24 bpp XGA+: Extended Graphics Array Plus
On CRTs, there was often a difference between the aspect ratio of the computer resolution and the aspect ratio of the display causing non-square pixels (e.g. 320 × 200 or 1280 × 1024 on a 4:3 display). The 4:3 aspect ratio was common in older television cathode ray tube (CRT) displays, which were not easily adaptable to a wider aspect ratio.
The difference is that whilst D1 has a 4:3 aspect ratio 960H has a 16:9 widescreen aspect ratio. The extra pixels are used to form the increased area to the sides of the D1 image. The pixel density of 960H is identical to standard D1 resolution so it does not give any improvement in image quality, merely a wider aspect ratio.
1080p progressive scan HDTV, which uses a 16:9 ratio. Some commentators also use display resolution to indicate a range of input formats that the display's input electronics will accept and often include formats greater than the screen's native grid size even though they have to be down-scaled to match the screen's parameters (e.g. accepting a 1920 × 1080 input on a display with a native 1366 ...
Speech Transmission Index (STI) is a measure of speech transmission quality. The absolute measurement of speech intelligibility is a complex science. The STI measures some physical characteristics of a transmission channel (a room, electro-acoustic equipment, telephone line, etc.), and expresses the ability of the channel to carry across the characteristics of a speech signal.
The frequency range often specified for audio components is between 20 Hz to 20 kHz, which broadly reflects the human hearing range. Well-designed solid-state amplifiers and CD players may have a frequency response that varies by only 0.2 dB between 20 Hz to 20 kHz. [4]
The target loudness is specified as the loudness of a stereo pink noise signal played back at 89 dB sound pressure level or −14 dB relative to full scale. [3] This is based on SMPTE recommendation RP 200:2002, which specifies a similar method for calibrating playback levels in movie theaters using a reference level 6 dB lower (83 dB SPL, − ...
A typical characteristic of a 2-way speaker is that at the crossover frequency, due to the physical distance between the centres of the woofer and tweeter, the sound that emanates from the combination is not omni-directional, but lobed. Within the region of the lobe the sound level, at the crossover frequency is much higher as compared to ...